PlanetMinis Forums banner

tmas.... 1982 Honda ATC70

119K views 448 replies 70 participants last post by  SS LS1  
#1 · (Edited)
I picked up this 1982 ATC70 a month ago. Very fun machine. It will be a ton of fun in the winter.The 4 DOWN trans is hard to get used to. It came with a set of wheelie bars.:)

I have the back decal coming.

tmas
 

Attachments

#4 ·
dirttrackin280h said:
Good find. Looks like a Maier aftermarket front fender? How's the quality compared to the stock OEM plastic? Enjoy!
I have a brand new Maier fender set for it. The front fender is a Maier and it is slightly different in shape than the original fender and sits higher. The Rear one is a little more flimsy than the original Honda back fender and is not as strongly reinforced as the original. I have a back fender decal coming so when I get it I will install the back fender and snap some pics.

tmas
 
#7 ·
edmonster said:
what are your plans for this trike
Going to keep it stock for a while. I am going to do a CDI conversion on it and get rid of the points. Don't want to make it to nice because it is going to see mud and snow. I also like the Douglas rims & holeshot tires you can get for the ATC 70.:) :) This may be next.

tmas





HONDA CT70 ATC70 SS50 Z50 XL70 CDI Electronic Ignition:eBay Motors (item 110398658501 end time Jul-04-09 10:53:27 PDT)



Honda ATC70 70 8" wheels and tires rims mini Holeshots:eBay Motors (item 160341742380 end time Jun-19-09 18:00:51 PDT)
 
#8 ·
tmas said:
Going to keep it stock for a while. I am going to do a CDI conversion on it and get rid of the points. Don't want to make it to nice because it is going to see mud and snow. I also like the Douglas rims & holeshot tires you can get for the ATC 70.:) :) This may be next.

tmas





HONDA CT70 ATC70 SS50 Z50 XL70 CDI Electronic Ignition:eBay Motors (item 110398658501 end time Jul-04-09 10:53:27 PDT)



Honda ATC70 70 8" wheels and tires rims mini Holeshots:eBay Motors (item 160341742380 end time Jun-19-09 18:00:51 PDT)




if your gonna be going through mud and snow i wouldn't keep it stock, these things are pretty gutless stock
 
#9 ·
tmas said:
I picked up this 1982 ATC70 a month ago. Very fun machine. It will be a ton of fun in the winter.The 4 DOWN trans is hard to get used to. It came with a set of wheelie bars.:)

I have the back decal coming.

tmas


Very nice find! Looks to be in great shape. But that is not a wheelie bar, it's a "grab bar". But I kind of get the impression that you were joking.



dirttrackin280h said:
Good find. Looks like a Maier aftermarket front fender? How's the quality compared to the stock OEM plastic? Enjoy!
The quality of Maier plastics sucks! It is so flimsy, dull, and the colors are no where near as vibrant as OEM. It's just that Maier is a lot cheaper.
 
#17 ·
Today I put a brand new Honda throttle cable, carburetor and air box. The NOS carb was from dratv $111. Woke the engine right up. Honda still stocks the throttle cable and the air cleaner housing which I purchased brand new, some of the rubbers in the old air filter housing had suffered dry rot. I have to say it runs perfect now after having a few carb issues.

tmas



Image




Image




Image


I find most ATC carbs are missing the choke cap cover.

Image




NOS carb link.

*OEM_HONDA CARB ATC70 78 TO 85 (CARB70) TRX70?
 
#21 ·
I bought this ATC off a good buddy who is a Honda freak. A few guys on this forum know him...:) He owned it for 10 years and didnt know it had a four speed.?. It just took me a long wait to get it off him. He Kreemed the tank 10 years ago. Still no problem.

tmas



Image




I also cleaned up the rusted axle tubes.

Image