Many others make them, BBR, Procircuit, BUD Racing, applied etc etc... I have BBR on 1 of my bike and BUD Racing(both upper and lower) on the other, both are great!

 

BBR makes them for the zokes which are smaller tubes and dont fit and all others make them for stock klx forks which are half the size.

 

Contact Special~K on here, he may be able to make you a set as he made a set for his.

 

I have zokes now and they are just a mm or two smaller, im wondering if i can machine the tripples to accept the other forks but i dont want the aluminum to be to thin and break on a hard landing. Has anyone tried this?

 

There cheap just to to eBay and type in cr85 clamps or type it In on google cr85 or cr85 expert you can get them for less then $100 or some super sweet anodized ones from applied or other companies for a couple hundred

 

I was thinking about doing that but the triples for the 85's are a bit wider and the handle bar mounts are to close to the rider, and also the fender and number plate will not bolt up correctly and i will have to drill the fender and make some brackets for the number plate and i think it would start to look stupid with a harley wide glide looking front end haha

 

Im on it... be patient grass hoppa And by the way, your putting 85 suspension on a mini, your gonna most likely gonna have to do some light fabbing such as drilling a hole or taking a bit off of bar stops

 

What you mean? If you have showas your gunna use 85 triples and your gunna have to use the cr85 number which looks better and of course your prolly gunna have to drill holes in the fender not once has a fender just bolted onto a set of triples for me so I guess I'm use to it like my first set of zokes I put on my 2010 so I had to drill a couples holes and I just put a 2012ktm 65 front fender On my second set of zokes which is on my Primmy but it's simple

 

too much work just sell me those forks :-D

 

I've been working very close with Ron at RSWracing.com Check out the site and give him a call. We currently have a lower that will require no drilling, and excepts klx AND crf fenders. The uppers will fit a klx plate, but for a honda a small bracket will need to be made. (very simple) Clamps are 6 position adjustable, and are 6061 u.s. billet. Anodizing avalible... call Ron and tell him Kenny sent you. Between us we will make a set to fit whatever bike you want

 

Does he have the clamps ready to go? I didn't see them on the site.

 

SSome pics of the clamps fresh out of the CNC, and then when I first put them on the bike last year.

RSWracing.com (408 842-1388 or email Ron at ron@rswracing.com

 

SSome pics of the clamps fresh out of the CNC, and then when I first put them on the bike last year.

RSWracing.com (408 842-1388 or email Ron at ron@rswracing.com

Hey Special K ... are you running a stock pitster wheel? if so what bearings are you running to except the 12mm axle? Also did you make a brake adapter to run the pitster rotor as well?

 

I also talked to Ron at RSW Racing, but we are not sure what steering stem to use. Any suggestions would be appreciated.

 

What bike do you have?

 

talk to wholesale cycle , believe they have a spare set like im running

 

I have a 2010 klx 110 and just got 2007 showas from a cr85. What stem do you use and ahere is the best place to get triples? Thanks

 

I would love to get a set of triples and stem like in your pics Special~K.If you could give me some direction that would be great.

 

Rswracing.com Guys name is Ron Wallace. Tell him Kenny sent you. Pm me your info because Ron doesn't know much about the stem applications to our bikes. I'll tell him what you need... he makes em for every bike/stem. I'm bias lol... I LOVE my clamps. They just look different from any other triple clamp out there.