[sxrscer189]

Im starting off with my 2005 bone stock DRZ 110 and fabing up my own custom mount for my caliper on my front forks. Everything will be bolt on and you will easily be able to change back to stock drums if you desire.



Parts so far:

2005 cr 85 master cylinder

2005 cr 85 caliper

2001 kx 65 front rim with hubs and spocks and stock disk.



ill post pics in a little bit so yall can do it your self.

 

[sxrscer189]

Didnt get as far as i wanted to tonight, oh well will for sure have the mount made tomorrow.. ive already made 3-4 today and they werent good enough..



here are a few pics

 

[JohnnyB]

:dance:

Oh boy-o ... oh boy-o ... oh boy ... I cant wait to see what you come up with !!!!



lol .., sorry .. :wall:

 

[sxrscer189]

I believe this is going to be tougher than I thought but I will make it happen by tomorrow evening. Well for the most part. Lol

 

[sxrscer189]

have the design down. should be done fabing everything by this evening.. pics later

 

[BALLSACK607]

saaaweeeeeeeeeet!!!

 

[shift22]

awesome man cant wait. STR was going to do this for me but i don't know what happen he stop responding to me.

 

[sxrscer189]

well if my design works like im thinking it will, then ill get you one for the cost of materials plus shipping..



im pretty confident in it.. (fingers crossed) lol

 

[shift22]

ok with me thanks

 

[shift22]

any up dates - pic's yet?

 

[sxrscer189]

should have more tomorrow.. gotta a little behind being the last week of class and finals and all that $**!..



i have the mount most made.. just gotta drill and tap it to mount the caliper.. so pics tomorrow for sure

 

[aedwards07]

Want to make another one if it works?

 

[sxrscer189]

if it works yea i can probly do that.. just pm me.. ill be posting full detailed measurements so anybody can make there own if they want too..

 

[SupWiz17]

how did it come out? Any more pics?

 

[sxrscer189]

i had to get some drill bits.. now im just waiting for my buddy to get off work so we can go out to his shop and finish her up.. should have pics up tonight..

 

[JackLHyde]

How do you get it done? I guess some custom spacers and axle long with the caliper mount are needed, aren't they?

 

[sxrscer189]

ok so the moment you have all been waiting for.. it is complete.. just need to put on a tire and bleed the brakes.. a few more minor things like getting a shorter brake cable.



so how its done you ask?



first is the spacers. one of them on the rotor side is the spacer that comes with the stock 110 wheel.. the other which is pictured i bought from ace hardwear and cut to lenght. Also between the mount and the inner side of the fork is a small washer to take up the extra space.



you will also need to grind down the chunk of metal on the inner side of the fork.. not all the way off just enough so the wheel will fit without any problems.



now onto the mount.

i believe it is 1/4 in steel plate.



Axel hole is cut. 10mm hole



then you will need to cut out for the piece of metal on the inner side of the fork that holds the stock drum from rotating.



then you will need to drill out the holes for the caliper to mount.

17/64 drill bit and an 8mm/ 1.25 tap to thread the plate.



basically once u get the holes cut you can trim the plate to however you want it to look.

 

[sxrscer189]

ill post up measurements of the mount later.. couldnt find a measuring tape in my buddys shop..lol

 

[koby686]

not to shabby! id run it!

 

[sxrscer189]

i cant wait to ride it.. im pretty confident with it.. there is virtually no movement in the mount at all.. no left/ right or up/down..