do you have any e22 heads, or do you have the right piston kit for this head.

 

do you have any e22 heads, or do you have the right piston kit for this head.

Yep. This head is an e22 variant. There are several different heads, all with similar dimensions, valve sizes and chambers. This particular version works very well on 88-108 motors, especially with the port work.



I have 52 and 54mm piston kits to match the head.

 

Could I use a flat 88 piston with this head or an e22?

 

could you bolt tis head up to a 50cc jug and a high comp. piston.

 

Could I use a flat 88 piston with this head or an e22?

Yes, but you'd have low compression. Really needs the domed slug to get things squezed properly.

 

could you bolt tis head up to a 50cc jug and a high comp. piston.

Physically, yes. Sensibly, no.

An 82-87 piston, and a little head milling would get you close.

 

great running head. got one of these from terry last week.

 

I like the guarantee. It shows you're a standup guy who is trying to create and maintain a reputable business. Good job!

 

Do you ship to Canada?

 

Do you ship to Canada?

You bet! I ship worldwide, via USPS Priority International.

I do have to charge for shipping, but actual cost only.

 

Cam is installed, valves adjusted, and rotated to overlap. That's why the red Sharpie line is there. This way, the rocker shafts don't slide out and the cam doesn't keep trying to rotate away from you while trying to get the chain and sprocket lined up. Always trying to make it easy for you guys