get a foam filter.

 

why will that change anything

 

there bettter

 

they're better. Still I would like to here what jets people are running. I think my girls xr50 has stock jets with a uni filter and two bros pipe.

 

they're better. Still I would like to here what jets people are running. I think my girls xr50 has stock jets with a uni filter and two bros pipe.

how does it run any bogging problems

 

Go to a local shop and see what the biggest sizes they sell for stock and run those. Youll lik the respones.

 

i have stock jets in

 

no offense but did u clean the carb? wut does the bike do? how much have u actually checked?

 

yeah i cleaned carb checked the float bowl and jets and all seem fine and it just dies if you pinn it and if you slowwly give it gass it just boggs everywhere

 

Bigger main jet problem solved.

 

what size main?

 

Check and see what main jet is in your bike now, then go up a few sizes. Say it has a 65, buy a 70 and a 75 and try them. see if it makes it better.

 

Yea maybe someone changed the jetting on her bike before she bought it actually. I will try to check in the next couple days.

 

clean air filter and check the idle

 

I would look other places than main jet for bogging everywhere.



How does your plug look?

 

plug only has half of the white rapping around it??



could that be the problem

 

Could be jetting but I would just throw a new plug in and see how it runs first since plugs are cheap. I had a stock setup with a k&n and pipe and my stock jetting was fine

 

If it is very white, you are too lean. You are looking for a light brown color on the plug.



It could be too lean because you have too small of a main jet, or an intake leak.

 

did it run right when u bought it?