2007 PITSTER X4:

146cc SGR MOTOR

RENTHAL FATBARS

FAST ACE SHOCK

STAGGS OIL COOLER

AHP PINK & BLACK GRAPHICS

 

Here's mine.

 

Here is my 12" bike:



This is the bike that Ryan Beat rode this year at Las Vegas MiniMotoSX and placed 5th on (Would of done better if Metzger wouldn't of hit him from behind before the gate dropped and pushed him into the gate which caused him to have a horrible start). This is the same bike that is on Two Brothers Website under the KLX110 section Here is a link to it: Two Brothers Racing :: KLX110 DR-Z110 Performance Parts



Engine:

1. CHP Billet 2nd gear
   
2. 4th Gear Shift Drum
   
3. One off crank specially made for Vegas this year (56.6mm stroker)
   
4. HD Output Shaft
   
5. Brand new Bearings for tranny
   
6. Bored Cases
   
7. Takagawa Quick Shift
   
8. Takagawa 6 disc Clutch w/Takagawa Primary Gear
   
9. Takagawa Cable Clutch
   
10. Moto HP/Maverick/Wiseco 165 Piston (With crank it makes it about a 185)
    
11. V2 head with Porting done by Mike Castro (One of the best in the biz- use to be BBR's Mechanic for Costella and McGrath)
    
12. Takagawa +R Manifold and Boot
    
13. 28 D-Slide Carb
    
14. Uni Angled Air Filter
    
15. Bump Start
    
16. Two Brothers M6 Exhaust
    

Suspension:



Front:

1. Marzocchi Dual Compression Dual Rebound fork legs Revalved by Feal Suspension
   
2. Fork Legs have been Anodized Pro Circuit Brown
   
3. Marzocchi triple clamps
   
4. Front wheel is a Talon Black Hub, Black Excel Rim, and Powder Coated Pink HD Spokes
   
5. Bridgestone 403 front tire and Kenda HD Tube
   
6. STR KX65 Front disc brake adapter
   
7. STR Extended KX65 brake line in Black
   
8. Galfer KX65 Oversized Wave rotor Made for STR Exclusively (200mm)
   
9. KX65 front Nissin Caliper
   
10. YZ250F front Master Cylinder
    

Rear:

1. Sano 3 piece Billet Swingarm and Tower
   
2. Ishock F8 revalved
   
3. Talon Black hub, Black Excel Rim, Pink Powder Coated HD Spokes
   
4. Galfer KX65 Wave Rotor
   
5. 44 tooth rear sprocket
   
6. STR Rear disc brake adapter kit for Big Bike Style swingarms
   
7. KX65 rear Caliper
   
8. YZ250F rear Mastercylinder
   
9. STR Extended Brake line
   

Misc.:

1. Two Brothers Tall Seat with N-Style Seat Cover in White
   
2. Renthal Black Bars
   
3. Pillow top grips (Pro Taper)
   
4. ASV F3 Brake lever with dust guard
   
5. ASV Pro Perch F3 Clutch Lever with Quick Adjust
   
6. White UFO Plastics with One Industries Printed STR Vegas Graphics
   
7. White Vent Hose for Gas Tank
   
8. Two Brothers Big Nutz Kit (Gas Cap/Tappet Covers/Cam Cover/Oil Cap/Ignition Cover/Chain Guard) NOTE: Stripped complete kit then anodized the kit Black (Which is not availible through Two Brothers)
   
9. Two Brothers Over The Top Brake Pedal (Stripped and Anodized Black which is not availible through Two Brothers)
   
10. Two Brothers Skid Plate (Stripped and Anodized Black which is not availible through Two Brothers)
    
11. Two Brothers Foot Peg Mount and Fastway Footpegs
    
12. Two Brothers Kickstarter
    
13. IMS Shifter that we had cut down then rewelded to shorten the shifter so that it makes it in a better position for the rider to shift
    
14. Chain Roller
    
15. Gold DID Chain
    
16. White Powder Coated Frame
    

 

 

here's my home made bike

no bbr or other off the self parts,home made(almost) all the way.

146cc sgr kit,kitaco power rev box,vm 26 carb.,takegawa exhaust.







100% hand ploisht gpx125 engine,custom side plate's.





custom leather seat.



piston brakefluid container.



Add a renhal playbar and some michelin starcross nubbie's,(12"front and rear)

and you get a verry nice littel stroker:grin:



made by onno buijnsters.

 

My KLX

143 Trail Bike

VM26

FMF

Footpegs red baron + five'o honey comb

Suspension TBR kx60 and DNM

Seat TBR

Handlebar Red baron

ASV....

 

Motor-

• Trail Bikes 143 Big bore kit
  
• Stock DR-Z 110 head ported and polished
  
• Mikuni VM 26mm
  
• Takegawa Manifold
  
• Mikuni HD intake boot
  
• One off carb bracket support
  
• K&N air filter w/ K&N "Pre Charger"
  
• Staggs Racing Oil cooler
  
• Hand Polished Trail Bikes Cable Clutch Kit
  
• 4th gear shift drum
  
• Two Brothers Racing M-6 Exhaust
  

Chassis-

• Stock 2005 Suzuki DR-Z 110 frame
  
• One off Cradle mount (Made by PM Member: j440)
  
• Two Brothers Racing Peg Mount
  
• Fastway Pegs
  
• Single piece Sano MX swingarm kit
  
• i-shock
  
• 2001 KTM 65 SX rear wheel & brakes
  
• Moose bearings
  
• Buchanan HD spokes
  
• Black excel rim
  
• Marzocchi Forks (Revalved by FEAL)
  
• Tapered bearings
  
• Scotts over sized Bar Mounts (Top Clamps
  
• Renthal Fatbars
  

Extras-

• Two Brothers Racing Tall Seat
  
• Blue N-Style Gripper seat cover
  
• Blue Two Brothers Racing Gas Cap
  
• One Off Brake Pump Bracket
  
• BBR Kickstart
  
• Two Brothers Racing OTT Brake pedal
  
• Shortened M-6 Canister
  
• CRF150 header heat shield
  
• Polished CRF Tappet Cover (Used as oil cap)
  
• Blue UFO Plastics
  
• Goon Logic Racing Graphics (Designed by me, printed By Jace Wade, Impulse GraphX)
  
• Renthal 47T Rear Sprocket
  
• DID Gold Chain
  
• BBR Throttle
  
• Renthal Kevlar Grips
  
• Thor Grip Donuts
  
• Yellow Gas Breather Hose
  

 

WHAT THE HELL it's got new graphics and wheels and other crap since last time I did this contest

 

my boy Cody's bike

 

Yo everyone,



I asked Jig to save me a spot for this month I hope I ll make it for this month s poll...

Rolling chassis:

- Vinco KLX frame

- Vinco Swingarm

- Fox shock with Hi/Low Compression + Rebound settings

- Showa forks redone by Vinco



Motor:

- Klx motor

- Takegawa 138 SH+R kit

- 55mm stroker crank

- Billet shift star

- Takegawa 4 speed drum

- Takegawa 6 disc clutch

- Takegawa Manual clutch cover

- Takegawa 4 speed close ratio transmition

- Takegawa quick shift



Thank you very much,



Ben

 

please find my bike



base: pitsterpro lxr

fork: kayaba of a 85cc

shock: c2p

engine: full takegawa 124

pipe: custom doma

 

mxrider112 got my vote !

 

siktendenciesracing got my vote

 

The 110:

Suspension:

New style Zokes redone by feal hard anodized pro circuit brown

Old Style two bros long travel swingarm w/ race tech shock

Engine:

143 Trail bikes w/ 26mm carb

Two bros 55mm stroker crank

Magura hydraulic clutch

misc.

bbr rims

custom pitbikepitstop.com graphics

fastway foot pegs

New skid plate

two bros kickstart

ect.

 

suzukirms got my vote for sure those colors are nasty feels like im dizzy

 

bbr 178

not finished figured ide give a sneak peak for october

 

there are 13 bikes now...

 

thats the nicest drz I think ive ever seen Susuki damn nice colour scheme

 

siktendenciesracing has either way to much money or good sponsors, lol check out his bikes on the regular 50s of the month-can we say jealous! And Im up against him haha!

 

please find my bike



base: pitsterpro lxr

fork: kayaba of a 85cc

shock: c2p

engine: full takegawa 124

pipe: custom doma

is that youre bike?

i think thats the bike were jeremy coen road whit in vegas,richt?

you made the stickers,geecobike's set up the bike.

 

that's not the bike from vegas.

jeremy coen ride for me in the french minibike championship.

and all preparations was made by rudice mechanics.

 

oh i'm sorry,it is a verry nice bike.(again)

but the one for vegas,you did the grafics for that one also,richt?

what ever,you have my vote.

 

This is my Italian pit-bike..The name is WT Motors XX150668R.



KLX 143CC

Mikuni vm26

Marzocchi

Dnm suspension

Formula brake

Bridgestone

 

Koby's got the sickest bike!! hahah since its pretty much like mine lol

 

STR definatly has the sickest bikes around. Gary's got my vote!