[donmx14]

I need a replacement rod for the 58mm stroker crank in my drz 205. I'm not sure who originally did the work to the crank. Looking for some people to contact to find a rod that will work.


Sent from my iPhone using Tapatalk

 

[FMFHATR799]

My best guess is storminnormin or turboshee mite be able to help you out

 

[dirtbkr188]

+1 on either one mentioned above, you might have to provide various measurements so they have an idea of what you have

 

[KlxRacer#2]

carillo

 

[donmx14]

My best guess is storminnormin or turboshee mite be able to help you out

I've sent chad aka stormin Norman a message on Facebook and on here and got no reply.


Sent from my iPhone using Tapatalk

 

[donmx14]

carillo

There on my list. Thanks.


Sent from my iPhone using Tapatalk

 

[donmx14]

It's just a oem rod but I'm not sure from what model. It has same markings as a stock Klx110 rod and looks identical. But a stock rod is too long. I put a stock rod on just to see. It takes about 4.5mm worth of gaskets to get it to sit just below top of cylinder


Sent from my iPhone using Tapatalk

 

[geezer]

I'd just put a tb 55mm crank in it. 2 mm of stroke ain't going to slow you down. Still a 193


Sent from my iPhone using Tapatalk