ok i am going to build a 88cc motor for my fiddy because i blew mine up. i was wondering if i can use the stock cam or do i need to put in some sort of race/highlift cam for it to run right? my bike is used for parking lot stuntin so i dont need alot of horsepower just a good low end to pull up wheelies. i dropped a valve on the old motor so i am not sure if the cam that was in there has to much lift and inturn thats why the intake valve hit the piston or if it was just a missadjusted valve. i was told when i bought the bike that it had a two brothers jug, piston, and cam. dont know if that is true or not, but it was definatly an 88 kit of some sort.
i plan on buying the 88 kit from trailbikes. its got a stock bottom end and i will be using the stock head. need to know what cam would be good to use... stocker or aftermarket?
thanks for the help.
i plan on buying the 88 kit from trailbikes. its got a stock bottom end and i will be using the stock head. need to know what cam would be good to use... stocker or aftermarket?
thanks for the help.
