the kitaco kits we sell, are all 52mm.

 

So the 52mm is a true 88cc kit? 51mm=85cc kit? 50mm=82mm?

 

True 88's are 52mm pistons, I havnt seen any that arnt.

 

thanks

 

Do you know The formula that figures out true "DISPLACEMENT" how to figure out CC's........PM me and I will tell you.





thanks OLDSCHOOL

 

Tell us in here. Could be a lesson to everyone.

 

Do you know The formula that figures out true "DISPLACEMENT" how to figure out CC's........PM me and I will tell you.





thanks OLDSCHOOL

I dont know what it is but I remember you giving us the formula a while back

 

what is stock xr50 stroke?

 

I made a new thread to explain how..?





Thanks OLDSCHOOL

 

41.4mm

 

I currently have a 52mm piston, stock 90 head, and stock crank. If i bought the 54 mm stroker crank that would give me a 115cc motor. What else would i have to buy other than the crank? will it bolt right in?

 

or the 50mm stroker crank? will that work? which would give me 106cc.

 

Hey Z,

I'm not sure about the 54mm crank..? but yes the 50mm should bolt right in. there are other things you have to be carefull of:



1). the skirt on the piston, the extra rod length may make the piston's skirt hit the crank when the piston is at bottom of the stroke..!



2). some stroke kits require that the cases are PRE BORED for clearences.





Thanks.......OLDSCHOOL