PlanetMinis Forums banner
1 - 20 of 20 Posts
the swingarm brake stop on a 50 is futher back versus a 70 is futher forward, i would think if you ran 50 swingarm on 70 you would be good on rear.

for the front maybe some used bbr sp5 would work i think they would fit in stock clamps.

good luck.
 
bbr sp5's are xr70 forks with bbr insides, i wanted to do the same thing to my 70. I was told the rear rim goes right on but if i put a 12 or 10 inch rim up front it would sit low in the front. but im not sure havent tried yet
 
run the 50 rear hub, buy a used 50 wheel if you do not have 50 hub, if you have 50 swingarm not 70 swing arm, we have both, the are differnt. i know the sp5's are 70 forks but i do not know if the brake stop is in a different location on the stock 70 forks or if you need the sp5's from a 50 to run fifty hub? good luck.
 
joanmomof4 said:
the swingarm brake stop on a 50 is futher back versus a 70 is futher forward, i would think if you ran 50 swingarm on 70 you would be good on rear.

for the front maybe some used bbr sp5 would work i think they would fit in stock clamps.

good luck.


its easy to modify, xr 70 swingarms were the OG extended 50 swingers.
 
Yo Chase! Dude you've been a member on pm for about 11 months. You've posted over 1,750 posts. That comes out to 147 posts per month. Or about 5 post a day. Good night Son!

SHouldn't you be out looking for a little stinky kitty?
 
no bbr's spoke stretcher was on back order so i just made one!!!! but i have 12"" front XR50 spokes on a rear xr 50 hub with an xr 50 front wheel. and i have a rear tire on it. i talked to five-o and this is what they said they where running on there bikes. so i listened to them and what do you know it worked. so i love the smart ass comments but **** i made it work and my spoke stretcher is better then ur spoke stretcher! hahahaha:D
 
1 - 20 of 20 Posts