PlanetMinis Forums banner
Cancel
Create thread New Forums

need a definitive answer abour wheels

Jump to Latest
1 - 10 of 10 Posts
P

paniro187

· Registered
Joined
·
61 Posts
Discussion starter · #1 ·
I have a roketa as you all know. I'm wanting to buy a 12 inch hoop for it as it has a 14 inch wheel stock the stock set up is a 32 hole set up. I'm wanting to know if i can buy a 12 inch hoop from staggs or one of these other vendors with spokes for a 12 inch set up and still use the stock middle hub. staggs told me they sell the spokes 32 for 25 bucks and the hoop has 32 holes in it. so there shouldn't be a prob right???



also the stock 12 inch in the rear of the bike i would like to buy quality spokes for it also.



sound slike this would work..............what say you guys???
 
#3 ·
Put spme pict up more than likely it is not the same hub...I tried to explain this to you...There are too many different styles to guess...I have much experience with swaping wheels on these china bikes but need to visually see the hub assembly...
 
#4 ·
All you have to do is make sure the spoke holes are the same as what you have and your gold.
 
Save
Reply Quote Like Like
#5 ·
paniro187 said:
staggs told me they sell the spokes 32 for 25 bucks and the hoop has 32 holes in it
Click to expand...


Who told you the could sell you a rim for $25.00? I would nuy a 12" & 10"!!!.... I emailed STAGGS/SGR about buying a 12" 32hole rim & they told me I would have to buy the whole wheel.



I am also looking to do the same as you are doing....Like they said above, just make sure the rim is 32 hole like your hub.
 
#7 ·
Oops! I read it wrong.....spoke for $25.00 not the rim.



How much did they tell you a 32hole rim would cost?



The point I was trying to make is they said I could only buy the whole wheel.



Any one know where I could buy a 12" 32 hole rim?
 
Discussion starter · #9 ·
TRT said:
Put spme pict up more than likely it is not the same hub...I tried to explain this to you...There are too many different styles to guess...I have much experience with swaping wheels on these china bikes but need to visually see the hub assembly...
Click to expand...
I'm thinking the hub doesn't have anything to do with this as i would be using the same hub that's stock on the bike except that i would use 12 inch spokes from staggs and a 12 inch rim from staggs the hub would still be what came on the bike.
 
1 - 10 of 10 Posts
About this Discussion
9 Replies
6 Participants
Last post:
Paxracing
PlanetMinis Forums
posts
2.1M
members
63K
Since
2003
PlanetMinis forum is the internet's largest mini bike community. View thousands of photos, event coverage, tips, tricks and performance mods.
Full Forum Listing
Explore Our Forums
CRF50 KLX110, DRZ110, TTR90 Chinese/Import Minis - General Discussion Z50, CT70 and JDM Monkeybikes Complete Bikes For Sale - All makes and models