Im almost done building my 95cc motor and was wondering about what to do about the clutch. Would adding HD clutch springs and discs do the trick or should I get a TB HD auto clutch? If I put the HD springs and discs in wouldn't that make it perform about the same as the TB cluch? I can get a clutch kit for quite a bit less than buying a TB clutch. What is everyone else running with their 95cc motors?
What upgrades should I make to my clutch?
dfred15
1 - 6 of 6 Posts
Joined
·
451 Posts
Im almost done building my 95cc motor and was wondering about what to do about the clutch. Would adding HD clutch springs and discs do the trick or should I get a TB HD auto clutch? If I put the HD springs and discs in wouldn't that make it perform about the same as the TB cluch? I can get a clutch kit for quite a bit less than buying a TB clutch. What is everyone else running with their 95cc motors?
Joined
·
8,023 Posts
I assume you are talking about either a daytona bvh or takegawa super head 95, @ any rate I would go for the sik 50s auto clutch perf kit it comes with your hd fibre plates and springs 50 dollars I have had two different motors with this and it held up fine. I had a daytona 75 with the stock head ported and decked .050 running about 15:1 comp, that motor ripped and the sik 50s clutch kit held up great and prevented any slipping. Now I have the same setup on my BBR 88 super pro motor no probs there either.
Joined
·
3,864 Posts
Get some hd springs and some new clutches and you'll be fine.
http://www.dratv.com/heduclspsetf.html
http://www.dratv.com/clutdissetau.html
Either get that for $26 or get the tb hd clutch assembly.
And what 95 kit are you using? Is it from dratv or what?
http://www.dratv.com/heduclspsetf.html
http://www.dratv.com/clutdissetau.html
Either get that for $26 or get the tb hd clutch assembly.
And what 95 kit are you using? Is it from dratv or what?
Joined
·
451 Posts
Im running a dratv cylinder I got off ebay with a tb 54mm piston. Then I'm buying an 88 kit with racehead and bigger valves from adam at attackpositionracing.com. I'm going to use the head, carb kit, and oil pump out of this kit and then sell the piston kit, gaskets and cylinder. So i guess its kind of a mutt.
Joined
·
451 Posts
Anyone know how this kit is? It says it has a 5 year warranty.
http://cgi.ebay.com/ebaymotors/ws/e...ISAPI.dll?ViewItem&sspagename=STRK:MEWA:PIC&viewitem=&item=4616153888&rd=1&rd=1
http://cgi.ebay.com/ebaymotors/ws/e...ISAPI.dll?ViewItem&sspagename=STRK:MEWA:PIC&viewitem=&item=4616153888&rd=1&rd=1
1 - 6 of 6 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
