Keihin PE 26 on a piranha 140?

JohnnieZ50R · May 1, 2016

Has anyone ever tried a Keihin pe 26 carb on a piranha 140?

If so how did it run? And what jets?

Any answers would be appreciated. Thanks.

Sent from my iPhone using Planet Minis

JohnnieZ50R · May 1, 2016

Bump

Sent from my iPhone using Planet Minis

dirtbkr188 · May 1, 2016

Is the PE26 an older carb, possibly from an older 2-stroke bike? There is no listing of a PE26 in the SUDCO catalog or the JetsRus website.

JohnnieZ50R · May 1, 2016

dirtbkr188 said:
Is the PE26 an older carb, possibly from an older 2-stroke bike? There is no listing of a PE26 in the SUDCO catalog or the JetsRus website.

It's actually on Alibaba and eBay and it's made for the yx125 , yx140 and I believe yx150.

Sent from my iPhone using Planet Minis

spiz5 · May 1, 2016

I use a genuine Keihin PE26 on a storminnorman built XR100 motor, It by far runs better with it than the VM26-606 I used to run.

JohnnieZ50R · May 1, 2016

spiz5 said:
I use a genuine Keihin PE26 on a storminnorman built XR100 motor, It by far runs better with it than the VM26-606 I used to run.

did you have to change jetting?

Sent from my iPhone using Planet Minis

spiz5 · May 1, 2016

I did as its the oem carb on a CR85, really it needs a different slide cutaway to run best on a 4 stroke, but Ive got it to where im satisfied. The big difference from the VM to the PE is how well it runs up top.

JohnnieZ50R · May 1, 2016

spiz5 said:
I did as its the oem carb on a CR85, really it needs a different slide cutaway to run best on a 4 stroke, but Ive got it to where im satisfied. The big difference from the VM to the PE is how well it runs up top.

the one I see on eBay is made for 4 strokes so I guess the only thing I'd have to worry about is jetting

Sent from my iPhone using Planet Minis

spiz5 · May 1, 2016

Jetting changes are to be expected with any new carb.

rm25088 · May 2, 2016

Yup. Altitude, temperature, ect are major factors in jetting. Joe shmoe from the west coast could run completely different settings on his carb than mary jane on the east coast. It could be close, but it wont be the same. So your better off with base line jetting and just figuring out what runs best for you.

JohnnieZ50R · May 2, 2016

I'm just thinking about copying everyone else and going for the mikuni vm26 because I know 100% it will run. But with the pe26 I can't seem to find anyone who ran it on there 140cc motor.

Sent from my iPhone using Planet Minis

Keihin PE 26 on a piranha 140?

JohnnieZ50R

JohnnieZ50R

dirtbkr188

JohnnieZ50R

Attachments

spiz5

JohnnieZ50R

spiz5

JohnnieZ50R

spiz5

rm25088

JohnnieZ50R

Top Contributors this Month

Recommended Communities