PlanetMinis Forums banner
1 - 20 of 34 Posts

Turboshee421

· Registered
Joined
·
229 Posts
Discussion starter · #1 ·
Well I got a little sidetracked from the V3 EFI project, I had some parts laying around so I decided to get another V3 frame and do one a little more simple.

Seeing as I'm a Honda guy this will be a CRF110 plastic bike. Well the first problem with this project is they don't make a gas tank that will fit, so I had to cut up some aluminum plate and start jacking sh*t up.

Now just because I want to make things a little more out of people's reach I decided not to do what everyone else does and use a bolt in gas cap. I cut some threads into some aluminum solid stock for the BBR cap.
 
Discussion starter · #11 · (Edited)
Thanks everyone for the kind words, I got some more done today. I got the subframe done except for the silencer mount "waiting for the silencer to come in". The tank is almost done just waiting for the 35mm carb to come in so I can make the tank around it and I'll be boring it out to 38mm. All the other mounting holes are done and waiting for the aluminum to come in to make the number plate mounts, so now it's a lot of waiting going on.
 
Discussion starter · #14 ·
Cuz that's one built yx201, when I built this motor I went all out. It's a 4 vavle head with big titanium 3mm stem valves I made from blanks, the rod is billet chrome moly I made, 7 plate clutch with 6 100 pound springs and to top it off 3rd gear, 4th gear and the out put shaft are made of m300, I got tired of killing the trans every time I rode it. The next thing is going to be a decomp cam cuz it sucks to fire off.
 
1 - 20 of 34 Posts