.sold.
Piranha 160r (might part out)
dr650
1 - 20 of 28 Posts
Joined
·
535 Posts
How much for the engine?shipped!
Joined
·
828 Posts
Dam thats a steal at $1k. If I was closer I would buy it for sure. Unless you are willing to ship??
If you decide to part I would be intersted in the rear swingarm and shock and the clamps for sure. I may be also interested in the wheelset, the brakes, the front forks, plastics, the engine, pretty much the entire bike except the frame. I have an extra SSR150R/slowracer frame lying around and for $1k I would consider buying yours complete and swapping all the parts over....hmmmm.....
If you decide to part I would be intersted in the rear swingarm and shock and the clamps for sure. I may be also interested in the wheelset, the brakes, the front forks, plastics, the engine, pretty much the entire bike except the frame. I have an extra SSR150R/slowracer frame lying around and for $1k I would consider buying yours complete and swapping all the parts over....hmmmm.....
Joined
·
2,208 Posts
how much for clamps?
Joined
·
828 Posts
I live in california. i have never shipped a complete bike before so I am not sure the best way to do that. I will PM you privately regarding price and the deal and everything, but if we can come to an agreement, breaking down the bike into multiple boxes is okay with me. I will be swapping everything over to a different frame so I would have to take it apart anyways. I will PM you or text.
Motor runs fine? Any issues with the bike? Suspension leaks? Adjusters work? Any cracks on the swingarm?
Why would you switch everything over to a different frame? The geometry is almost the same. It's not going to handle much different. Why go through the hassle? Serious question
Joined
·
828 Posts
For the same reason people would spend money on a reeg/billletware/etc crf70 aftermarket frame/chassis and then send it off to slowracer and pay him to cut up their brand new frame and reweld the headtube change the geometry of the frame. I figure if almost everyone who had full mod crf70's would spend the time and money to do this, and I already have one of these slowracer/ssr frames laying around then I might as well use it. Lots of people swear these frames are the best handling pit bike ever , better than bbr perimeter frames, so it would be a waste not to use it IMO.
I haven't ridden a piranha before, but I have asked about the difference between the slow racer and piranha frames to other people who have ridden both bikes and they said they are NOT the same and again the slow racer/ssr frame bike handles better. Would I be able to tell the difference? Maybe, maybe not, but if I have it I might as well use it. Plus if I sold it I could only get a couple hundred for it, and its not worth it to me to sell it especially now since you can no longer get them (except if you buy a used one).
But at this point probably wont even happen. This bike is an awesome deal and I would love to buy it but just sold two bikes because of bills I owed so it wouldnt be the smartest thing to go buy another bike after that....So to the seller: good luck with the sale. If you decide to part I may pick up a few parts.
Joined
·
483 Posts
This might be getting parted
$300 for total front end
$300 for complete rear with rims/tires shock brakes shock cover
$300 for motor with exhaust shifter, kickstarter carb/jets and uni filter and all the wires and electrical
Might be able to throw some of the rest of the parts in for a little extra
Plus shipping
$300 for total front end
$300 for complete rear with rims/tires shock brakes shock cover
$300 for motor with exhaust shifter, kickstarter carb/jets and uni filter and all the wires and electrical
Might be able to throw some of the rest of the parts in for a little extra
Plus shipping
Joined
·
1,974 Posts
Zokes or zoke copies?
Joined
·
585 Posts
Would you trade the yx 160 for a full mod Honda motor
Joined
·
483 Posts
http://planetminis.com/forums/impor...se-parts-sale/194660-piranha-p-160r-partout-elka-takegawa-marzocchi-keihin.html
Here's the frame and forks that are on it
Here's the frame and forks that are on it
1 - 20 of 28 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
