PlanetMinis Forums banner
1 - 8 of 8 Posts

71K0

· Registered
Joined
·
14 Posts
Discussion starter · #1 ·
I've got a stumble at high rpm on my new Lifan 125 and figure I need a larger main jet. I've read that I should have a 17.5 pilot and 100 main at my altitude. I'm running the stock carb that came with the Lifan 125 kit. Anyone know where I can get jets for this?
 
Discussion starter · #3 ·

Here's a picture of the carb. It says KF Standard of Japan, and PZ22 is stamped on it. I know I could just Google it, but I figure someone out there might have some experience with this carb. Let me know. Thanks.
 
Since it is such an off-brand carb, you might be better off replacing it with either a Mikuni or Keihin carb, that way the jets can be readily attained.

The alternative is to remove the main and pilot jets from that carb and measure them, to see if they can be matched up with Mikuni or Keihin jets. All the available Mikuni and Keihin jets can be found on THIS PAGE.
 
1 - 8 of 8 Posts