PlanetMinis Forums banner
Cancel
Create thread New Forums

New & Interesting products at T Bolt USA

Jump to Latest
161 - 180 of 319 Posts
Discussion starter · #161 ·
[h=1]Tall Bar Kit for XR50 & CRF50 With Sano Clamp
Part No: TRC-0870
Location: 102F[/h]


TRC Tall Bar Kit for XR50 & CRF50
Sweet set up for your Pit bike
Fit Stock CRF50 and XR50 Honda
Aluminum Tall Bars with Pro Taper Pad
High Rise Handlebars ( 152mm ) for use on all pit bikes.
SIZE: 7/8"(diameter)
Aircraft-grade 7075 T6
Sano Black or Red Clamp
Throttle
Long throttle cable
BBR carb cap for stock 50 Carb
Scott MX-2 Grips
Front Brake Lever
Long Front Brake cable
 
Discussion starter · #162 ·
great shifter for pitbikes and crf50/70 ct70 z50
[h=1]TB Aluminum Shifter
Z50 CRF50 XR50 CRF70 & Pit bikes
Part No: TBW0426
Location: 211C[/h]


TB Folding Gear Shift Lever -

This folding shifter is longer than stock and the tip is extended as well to prevent mis-shifts.

 
Discussion starter · #163 · (Edited)
THEY ARE BACK !!

BBR Super Stock Aluminum Swingarm CRF110F
Part No: 330-HCF-1131




BBR Super Stock Swingarm - CRF110F
Constructed of heat treated 6061 T6 aluminum with billet drop-outs and shock mount.
It is lengthened 2" over stock swingarm length.
Includes stainless steel bushings and needle bearings.
• 6061 T6 Aluminum
• Tig welded construction
• 2" longer than stock
• Needle bearing pivots
• HAND MADE IN USA

Please note: Due to the extended length of this swingarm a longer chain will be needed for installation. Part Number CRF110F, 13-Present

 
Discussion starter · #164 ·
And for all you cheaters
[h=1]BBR KLX/DRZ110 130cc Big Bore Kit All
Part No: 411-KLX-1101[/h]


BBR KLX/DRZ110 130cc Big Bore Kit
CHEATER !!
An easy bore in kit that increases your 110 motor to 130cc. Includes piston, rings, pin, clips, and gaskets. A quick and inexpensive way to really wake up your 110. Oversized piston bores into your stock cylinder.

• 57mm aluminum piston with pin, clips, and rings.
• Gasket kit including cylinder head, cylinder base and LH ignition cover gaskets
• Requires professional boring of your stock cylinder.

 
Discussion starter · #168 ·
back in stock
[h=1]FMF Factory 4.1 SS Exhaust
fits DRZ110 KLX110 KLX110L and Pit Bikes
Part No: W-79-2042[/h]


Kawasaki KLX110 and KLX110L '02-Present
Suzuki DRZ110 '03-05 Mini Factory 4.1 Muffler w/Stainless Steel Header System
FMF is the big name in pipes and there mini pipes rock

Stainless Steel MINI FACTORY 4.1 MUFFLER W/SS HEADER

This pipe can also be used with Pitster Pro x4 , SSR TX
and other china mid sized mini chassis when installing YX150/Y160 & ZS155cc engines with 8mm exhaust studs
Works well with V2 heads
Accepts
FMF Factory 4.1 SS Spark arrestor Quite core [W-79-0927]
sold seperatly in this section

 
Discussion starter · #169 ·
[h=1]KLX110 2010 present UFO Plastics Kit - Black
Part No: KA37003-001[/h]


UFO Kawasaki KLX110/110L Plastics Kit in Black
Contains:
  • Front Fender
  • Rear Fender
  • Radiator Covers
  • Side Panels
  • Front Number Plate
 
Discussion starter · #170 ·
[h=1]EZ Start High Performance CDI
Part No: TRC-5157[/h]


E-Z Start High Performance CDI
Low Advance at Low RPM for E-Z starting and Less Kick Back
No REV limit
Tested on our biggest 184cc and 193cc builds with vastly improved starting and 0 kickback
Replaces:
Standard China 5 pin CDI
(with jumper provided)
Honda 50/70 CDI
Works With:
YX Outer Rotor Stator
Standatd Gold Flywheel Stator
HD 6 pole stator
Honda CRF50/70 stators

SPEC:
0-500 RPM 10 Degrees advance
501 to 2000 RPM 20 Degrees advance
2001 RPM up 38 Degrees advance

 
Discussion starter · #171 ·
[h=1]TRC Adjustable Intake for Honda type heads
Part No: TRC-2093[/h]

  • Image
  • Image


Adjustable Intake for Honda type heads
Multiple mounting positions:
Standard CRF50 Backbone frame
Straight back Perimiter style

 
Discussion starter · #173 ·
Back in stock

[h=1]KLX 110 Wide Steel Pegs & Pins (Chrome)
Part No: TRC-5307
Location: 109E[/h]


KLX 110 Wide Steel Pegs & Pins (Chrome)
Fits KLX110 and DRZ110
Fits Two Bros KLX110 Pegmounts
Any Aftermarket Pegmount that Accepts Stock KAWASAKI KLX 110 pegs
NOT FOR BBR PEG MOUNT SINCE IT TAKES 50 PEGS

 
Discussion starter · #175 ·
New All Aluminum , Ceramic coated cylinder 67mm kit
[h=1]TB DRZ110 KLX110 178cc Bore Kit
Part No: TBW9145
Location: 220C[/h]


TB 178cc Bore Kit

178cc Big Bore Performance Kit (67mm):

- SKIRTED Aluminum cylinder w/ Ceramic liner
- High compression 67mm piston with rings, pin, & clips
- Head gasket kit

Affordable and will make your KLX110 or DRZ110 a lot more fun to ride! High quality parts
There are no installation instructions
If you don't have any experience working on your engine, we highly recommend purchasing the shop manual for your bike from your local Kawasaki or Suzuki dealer.
The parts are installed in the same manner as the OEM parts.
CASE BORE REQUIRED
Must use with the Race Head V2 or check clearances carefully
(not tested with other heads at this time).
  • TBW0897
  • TBW0802
  • TBW0758
  • TBW0305


 
Discussion starter · #176 ·
Back in stock
Actual Pictures provided
[h=1]FRD Rear Fender brace W handles
For DRZ & KLX110
Part No: TRC-1064[/h]


FRD Rear Fender brace with lift handles
Works with Pitster pro x4 and xr4 ,KLX/DRZ110 and may also fit other china mid size minis
Great product designed to save your fender in a loop out and help you lift your bike
Hardware
  • 2x M6x30
  • 4x M6x25
  • 4x M6 Nylock
  • 8x Washers
 
Discussion starter · #178 ·
[h=1]FRD Adjustable Pull Rod for Pitster Pro LXR
Part No: TRC-4919[/h]


FRD Adjustable Pull Rod for Pitster Pro LXR
Raise or Lower your LXR rear end for ultimate suspension adjustability

 
Discussion starter · #179 ·
Back in stock
http://tboltusa.com/store/bbr-swingarm-super-stock-klx110l-p-2392.html

BBR Swingarm - Super Stock / KLX110/L
Part No: 330-KLX-1131




BBR Swingarm - Super Stock / KLX110/L

Constructed of heat treated 6061 T6 aluminum with billet drop-outs and shock mount. It is lengthened 2 1/2" over stock swingarm length.
Includes stainless steel bushings and needle bearings. HAND MADE IN USA.

• 6061 T6 Aluminum
• Tig welded construction
• 2 1/2" longer than stock
• Needle bearing pivots
• HAND MADE IN USA
*Takes CRF50 type chain guides

Application:
KLX110/L, 02-Present *
FOR KLX110 DRZ110 & KLX110L

 
#180 ·
T Bolt USA said:
Tall Bar Kit for XR50 & CRF50 With Sano Clamp
Part No: TRC-0870
Location: 102F




TRC Tall Bar Kit for XR50 & CRF50
Sweet set up for your Pit bike
Fit Stock CRF50 and XR50 Honda
Aluminum Tall Bars with Pro Taper Pad
High Rise Handlebars ( 152mm ) for use on all pit bikes.
SIZE: 7/8"(diameter)
Aircraft-grade 7075 T6
Sano Black or Red Clamp
Throttle
Long throttle cable
BBR carb cap for stock 50 Carb
Scott MX-2 Grips
Front Brake Lever
Long Front Brake cable
Click to expand...
I picked this up and love the product but the front brake cable is short.. Unless I've missed something I can't seem to make it work.
 
161 - 180 of 319 Posts
About this Discussion
318 Replies
62 Participants
Last post:
T Bolt USA
PlanetMinis Forums
posts
2.1M
members
63K
Since
2003
PlanetMinis forum is the internet's largest mini bike community. View thousands of photos, event coverage, tips, tricks and performance mods.
Full Forum Listing
Explore Our Forums
CRF50 KLX110, DRZ110, TTR90 Chinese/Import Minis - General Discussion Z50, CT70 and JDM Monkeybikes Complete Bikes For Sale - All makes and models