Well here is my newest build I'm working on. My goal is to keep it all red barron as much as possible. Just a roller so far but plan on getting the motor tomorrow! I will try to keep up dated when new mods are done!
Red barron full mod build
crf207
1 - 20 of 26 Posts
Joined
·
179 Posts
Joined
·
2,420 Posts
I got so much Red Baron stuff .. Hit me up
Joined
·
179 Posts
Well I got my motor today and I have a couple questions so any help is appreciated!!
Well my first question is about the electrical. Can any tell me what wires go together lol. Im lost because there are more female plugs than male.
and secondly I need some opinions and what carb I should run.. It is a 70 motor and it will have a bbk and I plan on putting on a Fmf 4.1 or a pro circuit t-4.
Well my first question is about the electrical. Can any tell me what wires go together lol. Im lost because there are more female plugs than male.
and secondly I need some opinions and what carb I should run.. It is a 70 motor and it will have a bbk and I plan on putting on a Fmf 4.1 or a pro circuit t-4.
Attachments
Joined
·
1,150 Posts
Didn't get a chance to look at my bike this morning to be sure but of the top of my head it is just green-green and black-black. Doesn't matter which exact wire if I remember correctly. Your kill switch will use up 2 of the other wires.
Joined
·
179 Posts
Ok thanks for the help man! And I am planing on either getting a 22mm tb carb kit or a 20mm. Do you guys think the 22mm would be to much carb?
Joined
·
1,150 Posts
I don't think they do. Unless a cheap brand copied their guards.
Joined
·
1,569 Posts
They should be the same as Sano Bombshell forks but do not go just off my advice as I can't remember 100%. I do have atleast 1 fork guard for Red Baron 50 forks. Plus if you want to do a legit Red Baron build then drop a Daytona motor in that thing. Lol.
Would be cool to see an old David Pingree Red Baron replica
Joined
·
1,150 Posts
They aren't the same as Sano. The fork guards are much larger on the Sanos.
Friend used to have a set of Sanos is the only reason I remember.
I may have an extra set but I'm not sure. Might be able to get a set for you from RB though.
+1 on the Daytona. Love my 150 motor.
Joined
·
222 Posts
Depends on the big bore kit and other mods you decide on.
Joined
·
167 Posts
Great choice the RB Chromoly Pro kit, i'm running same set up since 2005!!!
i've been changing engine aver since the beginning, from china 125 to takegawa super head, now i'm running an Honda 88cc semoauto and it's the best thing ever...
too much engine will be hard to use on a so small ride! the only thing i don't like is the fron brake that i'm thinking on replacing with a formula one...
the sad thing is that there's no more RB official...
best wishes for your build!!!
i've been changing engine aver since the beginning, from china 125 to takegawa super head, now i'm running an Honda 88cc semoauto and it's the best thing ever...
too much engine will be hard to use on a so small ride! the only thing i don't like is the fron brake that i'm thinking on replacing with a formula one...
the sad thing is that there's no more RB official...
best wishes for your build!!!
Joined
·
179 Posts
well I'm only missing one lol so if your willing to sell it let me know but if any one has two i will by a set! And I might put in a Daytona once I start my reeg 70 this upcoming winter!!
Joined
·
179 Posts
Thanks man! I'm already loving the setup and it haven't got to rip on it yet! Lol
Joined
·
179 Posts
I'm planing on tb 88 kit
Joined
·
222 Posts
sweet
Joined
·
222 Posts
18mm or 20mm should be good for an 88cc kit
Joined
·
179 Posts
Just an update the build! I finials got all the parts I need to get her running and at least rideable! The exhaust is temporary so don't mind that fugly thing! So far the bike runs great but the build is on hold for because I'm looking to build/buy a 70! If any one has a pipe for sell let me know!
Attachments
1 - 20 of 26 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
