I need to get some parts like air filter, spark plug & chain ,stator plate. Will honda parts work on this bike?
What is this china bike?
leegreens
I need to get some parts like air filter, spark plug & chain ,stator plate. Will honda parts work on this bike?
21 - 40 of 59 Posts
Joined
·
214 Posts
I think your spot on! only thing i can't find is that Swing arm! (ugly as crap). My bike came with a bbr exhaust but it clearly does not fit. Will be looking for a decent exhaust soon.
Joined
·
1,155 Posts
Almost looks like a rocketa, but the rocketas I've seen have a huge plate on the left side that looks like a battery box , and I know the rocketas run that swing arm
Joined
·
214 Posts
yeah i can see the roketa in the mix too. swing arm matches along with the $10 yellow china shock (which is STIFF!!) Ill try and take some pics of my frame up close tonight as well.
Joined
·
214 Posts
+1 to that. though the frame is very limited to that swing arm.
Joined
·
1,155 Posts
Does the rear wheel have a 2 piece hub
Joined
·
214 Posts
don't believe so? but will dbl check tonight.
Joined
·
11,849 Posts
Joined
·
214 Posts
Here is my heap i picked up for under 3 bills! its a project no doubt.
![]()
![]()
![]()
![]()
![]()
Rim looks to be a one piece. Bike came with some goodies so that the only reason i really bought it. Kitaco intake and BBR exhaust. Exhuast as you can see does not fit lol so i will be selling that possibly but not sure what it would fit on? Needs a good cleaning. Took a picture of the head tube as well if that is any indication of what bike it may be? I need a new stator system as well so i am going with the inner rotor kit just because the kit above is more than i spent the bike itself. I'll snap off some better pictures tonight!
Rim looks to be a one piece. Bike came with some goodies so that the only reason i really bought it. Kitaco intake and BBR exhaust. Exhuast as you can see does not fit lol so i will be selling that possibly but not sure what it would fit on? Needs a good cleaning. Took a picture of the head tube as well if that is any indication of what bike it may be? I need a new stator system as well so i am going with the inner rotor kit just because the kit above is more than i spent the bike itself. I'll snap off some better pictures tonight!
Joined
·
214 Posts
Joined
·
214 Posts
this is the route i went. ordered it and should be around early next week. Never fired the bike up yet so i need to do quite a bit of work before i can review it. Clean carb, find an exhuast or re-mount the bbr on it. i figured for 35 bucks why the hell not. The 110 i think is a good motor for the kit becuase it doesn't really need the weight of the flywheel to keep it from stalling off power. Plus this will let the motor rev a little higher.
Inner Rotor Kit CRF50 CRF 50 XR XR50 70 Z SDG SSR 107 110 125 Pit Bike U IR01 | eBay
Inner Rotor Kit CRF50 CRF 50 XR XR50 70 Z SDG SSR 107 110 125 Pit Bike U IR01 | eBay
Joined
·
214 Posts
ive had them ship wrong items and they will correct it and let you keep the wrong item and ship right one for free of charge. lol but then its up to you too sell the wrong item. i throw up a review on this thread when i get her running.
Joined
·
214 Posts
Found a couple threads using the search "installing inner rotor" here is a wiring diagram for it! it basically just install right on your existing stator plate.
Link
http://planetminis.com/forums/chine...mport-minis-general-discussion/109846-need-help-installing-inner-rotor-kit.html
Diagram Pic
![]()
Link
http://planetminis.com/forums/chine...mport-minis-general-discussion/109846-need-help-installing-inner-rotor-kit.html
Diagram Pic
21 - 40 of 59 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
