PlanetMinis Forums banner
1 - 5 of 5 Posts

99tmsmith

· Registered
Joined
·
1,347 Posts
Discussion starter · #1 ·
What size sprockets are you guy running on your full mods?
I have a 110 with a kitaco 143cc With a SE HEAD with a hydro clutch. Mx swingarm, and ssr front end And I want to change the sprocket sizing around.i don't want to go any bigger in the front just change it around in the rear. I have a 13 in the front and a 33 in the rear.i most ride track and a little trail riding. I want to have a little more bottom torque but keep top speed pretty much the same What do you guys have on your bikes?
 
What size sprockets are you guy running on your full mods?
I have a 110 with a kitaco 143cc With a SE HEAD with a hydro clutch. Mx swingarm, and ssr front end And I want to change the sprocket sizing around.i don't want to go any bigger in the front just change it around in the rear. I have a 13 in the front and a 33 in the rear.i most ride track and a little trail riding. I want to have a little more bottom torque but keep top speed pretty much the same What do you guys have on your bikes?
Im running a ported 143SE in a perimeter with vm26 with only 3spd and am running 14/37 which is virtually 13/34. I ride the big track and pit bike track at my local mx and it lets me stretch out 3rd a little better and still have good bottom in corners. I tried 13/37 and it wasn't too bad on the pitbike track but second was short. I'd say like 13/35 or 36 would be good for the trails and some track...
 
Discussion starter · #4 ·
Cool thank you! I'll try 14 37 sprockets. I went track a coupe weeks ago and it seamed like I couldn't get enough speed out of the corners. I mostly track ride now And with trail riding I might go twice a year not to often.
 
1 - 5 of 5 Posts