PlanetMinis Forums banner
1 - 15 of 15 Posts

PINIT2WINIT133

· Registered
Joined
·
127 Posts
Discussion starter · #1 ·
alright not looking for zokes not spending that much what forks would be best Pitsters kx65's ktm 65's or should i send my yz80 forks into feal to get em fitted for 110???
 
u can make kx65 forks real nice for about $500(including buying forks). buying used pitster forks and getting done by feal,prolly bout $350-400. ktm65 (i wouldnt bother),and as for yz80 forks,ive never ridden those. so thats up to you. lol
 
Discussion starter · #3 ·
u can make kx65 forks real nice for about $500(including buying forks). buying used pitster forks and getting done by feal,prolly bout $350-400. ktm65 (i wouldnt bother),and as for yz80 forks,ive never ridden those. so thats up to you. lol




alright cool thanks but kx65 forks are they good?
 
Why wouldnt you bother with ktm65 forks? They are zokes, not to mention you can get works cartridges for them as well you don't have to but you can, Personally I'd go for ktm 65's, But I know if you got the ktm 65's with works cartridges would be a sick set up. And don't go for the yz 80 forks get like 08 rm 85 forks there showa get them dropped 2.5 they would absolutely be the best for you could get.
 
Discussion starter · #13 ·
well i have a 07 cr85 with some showas redone by race tech but not sure if i should use those because i might sell the bike for money to build a bike but i got those forks and it has rad hubs what do you guys think
 
i built a set of cr85 forks for my bike and i love them. just keep those forks and send them into feal suspension and for around $350 he can set them up to run on a 110. get you a kx65 front wheel and spoke set and they will lace right up the the 85 hub. as for the clamps press out the stem in the 110 bottom clamp and use it to replace the stem in the 85 clamps. this makes the triple clamps from the 85 work and bolt up in your 110. if you already have the forks and hub fom the 85 then your looking at about $550-600 to build. and this setup is amazing with a really nice rear setup.
 
Discussion starter · #15 ·
i built a set of cr85 forks for my bike and i love them. just keep those forks and send them into feal suspension and for around $350 he can set them up to run on a 110. get you a kx65 front wheel and spoke set and they will lace right up the the 85 hub. as for the clamps press out the stem in the 110 bottom clamp and use it to replace the stem in the 85 clamps. this makes the triple clamps from the 85 work and bolt up in your 110. if you already have the forks and hub fom the 85 then your looking at about $550-600 to build. and this setup is amazing with a really nice rear setup.


thats my thing ill have enough mula for front forks but not a swinger and shock so if i got the forks done theyll be sitting for a while cuz im only 14 so i dont got a job :/
 
1 - 15 of 15 Posts