what pipe do you think has the biggest header diameter and has the best exhaust flow? Dont care for what it sounds like just want the pipe that will let the most exhaust out.
Exhaust flow?
Marconi22
1 - 20 of 20 Posts
The new yoshi pipe has the best flow. The header and can has the largest step up in diameter. I know because I called Leo Vince,bbr,yoshi,fmf and so on. I got specs for all the systems, then compared them. Yoshi is the largest in diameter from header to can. This also proved to be an issue for me when I installed my shock relocation bracket. The header was so large it had no clearance, but if ur not going to run a aftermarket swinger it won't be an issue. If u are, check my thread on it to see the fix.
Joined
·
3,757 Posts
Exhaust is just like porting. Just because it's big doesn't mean you are gonna get big power.
Understand that manufactures make pipes based on certain builds or what the market is generally calling for so as long as your build is based on what they designed the exhaust for, then you will get more performance out of it.
Try tossing on a Yosh pipe on a stock build and see what happens or for that matter, try a PC pipe on a 195 build.
These are both very good exhaust builders but their elements are very different.
Understand that manufactures make pipes based on certain builds or what the market is generally calling for so as long as your build is based on what they designed the exhaust for, then you will get more performance out of it.
Try tossing on a Yosh pipe on a stock build and see what happens or for that matter, try a PC pipe on a 195 build.
These are both very good exhaust builders but their elements are very different.
Joined
·
1,673 Posts
naw powercore 4= junk.. haha and like you said it doenst even look good.
fmf 4.1 = big power with big cc's from what i hear. I only have 1 on my 50
the two bros m6 works good from what i can tell 155-194cc's stroked
fmf 4.1 = big power with big cc's from what i hear. I only have 1 on my 50
the two bros m6 works good from what i can tell 155-194cc's stroked
Joined
·
1,673 Posts
nice man the new uhf exhaust sounds loud! deff a good choice
Joined
·
361 Posts
The FMF 4.1 has worked well with my 172 setup.
Joined
·
1,684 Posts
Doesn't shortening the can or silencer take away top end??
Joined
·
1,673 Posts
Joined
·
25 Posts
wanna throw a 4.1 on my pitster. Its got a jialing, with a 146 kit and a TB race head...... not sure what pipe would fit it, anyone know?
Joined
·
489 Posts
1 - 20 of 20 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
