has any one ran BBR damping rods with a stock swingarm, if so did it lift the front to high compared to the back
BBR damping rods
drz63
1 - 11 of 11 Posts
Joined
·
3,900 Posts
Yeah, a little bit. You just raise the tubes in the clamps about a half inch, or do TBR rods as they are a little bit shorter. --L*64
Joined
·
3,900 Posts
You'll probably be fine at the local races, but will get snubbed if you try to run the setup in Vegas. --L*64
Joined
·
1,109 Posts
They work great I highly recomend a set, i went so far as to make a few of my own with differnt lenghts and oil port sizes ,as well as springs and oil you can make the stock forks work pretty good.
Also as far as sliding the forks up and down in the clamps it allows you change the way you bike handles . i recomend trying differnt positions so you get to notice the feel and will know witch works better for track or trail.
Also as far as sliding the forks up and down in the clamps it allows you change the way you bike handles . i recomend trying differnt positions so you get to notice the feel and will know witch works better for track or trail.
1 - 11 of 11 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
