This is the bike that Ryan Beat rode this year at Las Vegas MiniMotoSX and placed 5th on (Would of done better if Metzger wouldn't of hit him from behind before the gate dropped and pushed him into the gate which caused him to have a horrible start). This is the same bike that is on Two Brothers Website under the KLX110 section Here is a link to it: http://www.twobros.com/Perf_Products/KLX110_Perf/KLX110_DR-Z110.htm
Engine:
Suspension:
Front:
Rear:
Misc.:
I am looking for $8000 OBO for this bike and pretty much everything on the bike has 2 rides on it (1 ride being at vegas so about 20-30minutes) and was built from the frame up right before Vegas this year. There are only a few parts on the bike that have more then just 2 rides on it. I will be posting up more pics of the bike once Shelby sends me some more over from the photo shoot he did on both the 10" and 12" bikes. I will be posting up for sale the 10" bike also that Ryan took 3rd on in vegas this year.
We will also take trades for a CRF150R plus cash because we are trying to build a 12/14 CRF150R at the moment and that would help us get that done.
For any questions please email me at garymarshall254@Hotmail.com and yes I am willing to ship to the US or outside the country also. Note: Shipping will be paid by Buyer, but I will handle all the prep for shipping.
![Image]()
Engine:
- CHP Billet 2nd gear (2 rides)
- 4th Gear Shift Drum (2 rides)
- One off crank specially made for Vegas this year (56.6mm stroker) (2 rides)
- HD Output Shaft (2 rides)
- Brand new Bearings for tranny (2 rides)
- Bored Cases
- Takagawa Quick Shift (2 rides)
- Takagawa 6 disc Clutch w/Takagawa Primary Gear (2 rides)
- Takagawa Cable Clutch (2 rides)
- Moto HP/Maverick/Wiseco 165 Piston (With crank it makes it about a 185) (2 rides)
- V2 head with Porting done by Mike Castro (One of the best in the biz- use to be BBR's Mechanic for Costella and McGrath) (2 rides)
- Takagawa +R Manifold and Boot (2 rides)
- 28 D-Slide Carb (2 rides)
- Uni Angled Air Filter (2 rides)
- Bump Start
- Two Brothers M6 Exhaust (2 rides)
Suspension:
Front:
- Marzocchi Dual Compression Dual Rebound fork legs Revalved by Feal Suspension (2 rides)
- Fork Legs have been Anodized Pro Circuit Brown (2 rides)
- Marzocchi triple clamps (2 rides)
- Front wheel is a Talon Black Hub, Black Excel Rim, and Powder Coated Pink HD Spokes (2 rides)
- Bridgestone 403 front tire and Kenda HD Tube (2 rides)
- STR KX65 Front disc brake adapter
- STR Extended KX65 brake line in Black
- Galfer KX65 Oversized Wave rotor Made for STR Exclusively (200mm) (2 rides)
- KX65 front Nissin Caliper
- YZ250F front Master Cylinder
Rear:
- Sano 3 piece Billet Swingarm and Tower (2 rides)
- Ishock F8 revalved (2 rides)
- Talon Black hub, Black Excel Rim, Pink Powder Coated HD Spokes (2 rides)
- Galfer KX65 Wave Rotor (2 rides)
- 44 tooth rear sprocket
- STR Rear disc brake adapter kit for Big Bike Style swingarms
- KX65 rear Caliper
- YZ250F rear Mastercylinder (Integrated type)
- STR Extended Brake line (Black)
Misc.:
- Two Brothers Tall Seat with Brand New N-Style Seat Cover in White (Not Pictured)
- Renthal Black Bars
- Pillow top grips (Pro Taper)
- ASV F3 Brake lever with dust guard
- ASV Pro Perch F3 Clutch Lever with Quick Adjust
- White UFO Plastics with One Industries Printed STR Vegas Graphics
- White Vent Hose for Gas Tank
- Two Brothers Big Nutz Kit (Gas Cap/Tappet Covers/Cam Cover/Oil Cap/Ignition Cover/Chain Guard) NOTE: Stripped complete kit then anodized the kit Black (Which is not availible through Two Brothers)
- Two Brothers Over The Top Brake Pedal (Stripped and Anodized Black which is not availible through Two Brothers)
- Two Brothers Skid Plate (Stripped and Anodized Black which is not availible through Two Brothers)
- Two Brothers Foot Peg Mount and Fastway Footpegs
- Two Brothers Kickstarter (2 rides)
- IMS Shifter that we had cut down then rewelded to shorten the shifter so that it makes it in a better position for the rider to shift
- Chain Roller
- Gold DID Chain (2 rides)
- White Powder Coated Frame (2 Rides)
I am looking for $8000 OBO for this bike and pretty much everything on the bike has 2 rides on it (1 ride being at vegas so about 20-30minutes) and was built from the frame up right before Vegas this year. There are only a few parts on the bike that have more then just 2 rides on it. I will be posting up more pics of the bike once Shelby sends me some more over from the photo shoot he did on both the 10" and 12" bikes. I will be posting up for sale the 10" bike also that Ryan took 3rd on in vegas this year.
We will also take trades for a CRF150R plus cash because we are trying to build a 12/14 CRF150R at the moment and that would help us get that done.
For any questions please email me at garymarshall254@Hotmail.com and yes I am willing to ship to the US or outside the country also. Note: Shipping will be paid by Buyer, but I will handle all the prep for shipping.
