PlanetMinis Forums banner
Cancel
Create thread New Forums

I have to say somthing.... japan......

Jump to Latest
Status
Not open for further replies.
1 - 20 of 22 Posts

tysonb

· Registered
Joined
·
1,454 Posts
Discussion starter · #1 ·
I'm not sure why but isn't this the Chinese thread?



Everyone that own's somthing other than Chinese bikes come on this exclusive thread about China bikes and slam them.



I realize that the moderators have their hands full but come on people. When a new thread or comment is posted and it's in the China section and all you can do is chime in and say all China is crap you just look like a tool.



It's like going to a car lot with all red cars and saying you hate red! Fine hate red all you want but quit slamming everyone else who does like red.



I don't go to the xr50 threads and talk crap, why?



Because I own a china bike and I stick the the china forum.



I know I'm barking up a tree and no one will listen but I had to say it. :)
 
#4 ·
tysonb said:
I'm not sure why but isn't this the Chinese thread?



Everyone that own's somthing other than Chinese bikes come on this exclusive thread about China bikes and slam them.



I realize that the moderators have their hands full but come on people. When a new thread or comment is posted and it's in the China section and all you can do is chime in and say all China is crap you just look like a tool.



It's like going to a car lot with all red cars and saying you hate red! Fine hate red all you want but quit slamming everyone else who does like red.



I don't go to the xr50 threads and talk crap, why?



Because I own a china bike and I stick the the china forum.



I know I'm barking up a tree and no one will listen but I had to say it. :)
Click to expand...




Every bike has problems.... chinese more than hondas... get over it man, I am allowed to talk as much crap as I want to... I had a chinese bike, sh!t I had 2 of them, thank god I got rid of them....
 
Save
Like Like
#7 ·
actually its like saying my Snap-On wrench is better than your dollar store special wrench....and it is



so why are you crying that chinese bikes are crap....they are
 
#8 ·
When Japanese (Honda) is tried and true for all these years, why would you want to deviate and deal with all the headaches? Craftsmanship, engineering, there's just no comparison.
 
Discussion starter · #10 ·
looks boys you're missing the point, WE ALL KNOW: that japan makes a better bike.



WE ALL KNOW IT.



This particular section of PM is for china bike people, not Japan bike people coming in and wagging their tail feathers and pointing big fat fingers and saying, "I told you so."



So stop it, no one likes it, and you wind up looking like arses. No one is arguing with you that japan makes a better bike.



Let me make the point again: This is a china forum, not a japan forum, we who own china bikes like them and that's ok that we like them, either add somthing positive to help or stick to your sections of PM.
 
#11 ·
tysonb said:
looks boys you're missing the point, WE ALL KNOW: that japan makes a better bike.



WE ALL KNOW IT.



This particular section of PM is for china bike people, not Japan bike people coming in and wagging their tail feathers and pointing big fat fingers and saying, "I told you so."



So stop it, no one likes it, and you wind up looking like arses. No one is arguing with you that japan makes a better bike.



Let me make the point again: This is a china forum, not a japan forum, we who own china bikes like them and that's ok that we like them, either add somthing positive to help or stick to your sections of PM.
Click to expand...




So....



Since this is not bike related or about a bike problem, you should not be wasting threads in the china forum. This should have been posted up in the off-topic forum.



Get some kleenex ready
 
Save
Like Like
#13 ·
Unless you are about 14, or have a mental age of 14, you know that you get what you pay for. I paid about $750 shipped for my SDG and still think it was a good buy. If I had to go down to the Honda store and shell out probably twice that amount for a similar bike, I wouldn't have done it, and I wouldn't have a mini today. The fact is, chinese made products let those that normally wouldn't spend a higher sum of money for a better made bike have something that is good enough for what they want. I didn't buy my SDG with the intent to race it in competition, just for fun in the local area, and to tinker with because I love doing that as a hobby. It doesen't have a Honda backed warranty, it has none at all, but that's just fine for me because I will cover it myself if something breaks and have fun doing that. Chinese made bikes get slammed a lot but I think that a big part of the problem is that inexperienced guys don't know how to tighten a bolt properly, or understand how a carburetor works, and those are the guys that should stick to buying Hondas so that the factory backing will fix it for them. Everyone Loctites the crap out of these bikes because they forgot to tighten a few bolts and so believe it was the bike's fault for being chinese, when if they would just pay a bit more attention to their work nothing would fall off. I have ridden my SDG for probably 4 hours now and haven't had a single bolt loosen, and I don't use Loctite.
 
#15 ·
DGA said:
Unless you are about 14, or have a mental age of 14, you know that you get what you pay for. I paid about $750 shipped for my SDG and still think it was a good buy. If I had to go down to the Honda store and shell out probably twice that amount for a similar bike, I wouldn't have done it, and I wouldn't have a mini today. The fact is, chinese made products let those that normally wouldn't spend a higher sum of money for a better made bike have something that is good enough for what they want. I didn't buy my SDG with the intent to race it in competition, just for fun in the local area, and to tinker with because I love doing that as a hobby. It doesen't have a Honda backed warranty, it has none at all, but that's just fine for me because I will cover it myself if something breaks and have fun doing that. Chinese made bikes get slammed a lot but I think that a big part of the problem is that inexperienced guys don't know how to tighten a bolt properly, or understand how a carburetor works, and those are the guys that should stick to buying Hondas so that the factory backing will fix it for them. Everyone Loctites the crap out of these bikes because they forgot to tighten a few bolts and so believe it was the bike's fault for being chinese, when if they would just pay a bit more attention to their work nothing would fall off. I have ridden my SDG for probably 4 hours now and haven't had a single bolt loosen, and I don't use Loctite.
Click to expand...


+1



I am 14 and i do know that i get what i pay for =) im on my second chinese bike and its holding up really good (and its not a stock SDG or anything that has beast mode parts on it, its even cheaper than that) and ive had it for like 8 months and have put WAYYYY too many hours on it like 200+ hours i'd imagine. and not one single thing has broken so far except one bolt that hold the skidplate on and that was my fault for snapping the head. ive got sooo many miles and hours on it the shift drum is just now BARELY starting to go out on it. so my thoughts are that if you just want a cheap bike to play on and not race. go chinese. they will hold up just fine if you dont abuse them. and my view of abuse is a grown man riding a mini...you gotta think. they werent made for that. and thats why we see BBR and all them making aftmk parts so that grown men CAN ride them. me personally i ride like a maniac. i jump jumps that are waaayyy to big for my bike and it has handled it really well. even though im only pushing 100 lbs. ppl complain about chinese bikes breaking because there are full grown men on them. and i do agree that they are made cheap. they do break and mess up and stuff but if they average 10 year old got a china bike, my bet is that it would hold up just like a honda. well thats just my 0.2 (or whole dollar for that matter)
 
Discussion starter · #18 ·
Waffle said:
So....



Since this is not bike related or about a bike problem, you should not be wasting threads in the china forum. This should have been posted up in the off-topic forum.



Get some kleenex ready
Click to expand...


lol, you sure do have a high opinion of yerself, tell me do you come with fruit topping and whip cream too? LMAO...:D
 
#19 ·
I think for the most part people will naturally bash anybody or

anything not just like them. Kinda sucks if you ask me. Kinda like



Pepsi versus Coke

Honda versus Yamaha versus Suzuki versus Kawasaki

Toyota versus Honda versus Nissan



Either way most folks make themselves feel better when bashing

something. It is the old bully system. Life is too short to spend

trying to please haters.



:afro:



P.S. You can buy Derek Costello's vegas bike for close to $10,000.

Guess what, it doesn't come with a guarantee that you will become

a better rider. It just means you have a expensive bike.

 
#20 ·
amen..........heck my xr70 is giving me more problems than my ktm (Austrian not japanese) and im probably gonna sell it for a pitster.........people need to quit haten its there money let um do what they want with it!
 
1 - 20 of 22 Posts
Status
Not open for further replies.
You have insufficient privileges to reply here.
About this Discussion
21 Replies
15 Participants
Last post:
arlindsay1992
PlanetMinis Forums
posts
2.1M
members
63K
Since
2003
PlanetMinis forum is the internet's largest mini bike community. View thousands of photos, event coverage, tips, tricks and performance mods.
Full Forum Listing
Explore Our Forums
CRF50 KLX110, DRZ110, TTR90 Chinese/Import Minis - General Discussion Z50, CT70 and JDM Monkeybikes Complete Bikes For Sale - All makes and models