Can you guess what this will be? :-)
mo-tarded
1 - 18 of 18 Posts
Joined
·
6,009 Posts
nope im going to definteally say a seat?
Joined
·
630 Posts
p3racer said:A
![Image]()
:hitwithrock:
Haha, I hope not!
Crank is the Kitaco 44.2mm short stroke. Re-worked by Falicon. Apparently new it was not good enough for them.
61mm race piston (134cc class limit)
6 Spd trans thanks to Stick the Bologna man.
6 disc
IRK
And if Dood ever decides to send my +r back (he's had it 5 mos) I'll be running an S-35 with a 28mm PWK.
Should be a real screamer!
Joined
·
630 Posts
p3racer said:
Yeah, I was suspicious of that suggestion as well. I have other cams, I'll play around with 'em till I get it right.
boonacka said:
Yes it is. The parts are available in tiawan and thialand. You can get all of them for about 400.00. Plus you have to do a little machine work to the case.
Joined
·
16,707 Posts
I think the S35 will be the way to go. 134cc at high revs is flowing a lot of air for only 30mm intake valve. Once the valve angles get swung out and port raised, a shorter duration high lift cam can work better. I think?
Joined
·
1,397 Posts
sweet trans!!!!
hey did you figure out the shift fork thing?
i sent Trick an email, but never got a response.....
pm me if you still need info.... i've been too busy in the garage to be on here much!!!
you're going to love that trans dude...... theres ALWAYS a right gear!!!
hey did you figure out the shift fork thing?
i sent Trick an email, but never got a response.....
pm me if you still need info.... i've been too busy in the garage to be on here much!!!
you're going to love that trans dude...... theres ALWAYS a right gear!!!
Joined
·
479 Posts
uh-o....DOOD you laggin againmo' tarded said::hitwithrock:
Haha, I hope not!
Crank is the Kitaco 44.2mm short stroke. Re-worked by Falicon. Apparently new it was not good enough for them.
61mm race piston (134cc class limit)
6 Spd trans thanks to Stick the Bologna man.
6 disc
IRK
And if Dood ever decides to send my +r back (he's had it 5 mos) I'll be running an S-35 with a 28mm PWK.
Should be a real screamer!
Joined
·
630 Posts
Z50King said:
Taller piston? No. Longer Rod? Yes. It is the the Kitako 44.2 crank assy R&R'd by falicon and bushed to fit a 13mm wrist pin. Piston is a MotoHP. Bummer though, no longer made. They are not carrying the domed race fuel version any longer. And that one is my last one.
I have all the other parts....
A lot of them came from Bike bandit. And MotoHP.1 - 18 of 18 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
