PlanetMinis Forums banner
1 - 20 of 36 Posts

bear321

· Registered
Joined
·
290 Posts
Discussion starter · #1 ·
hey everybody arizona honda is holding a minimoto race on june 5th . it starts at 4:00pm . but u need to be sign in before the 5th. so call them to find out about the race.#1-520-748-7202
 
SunValleyMX said:
even with aftermarket suspension?? Thats good cause i really wanna race it


MM12 Stock/Mod-

The following items must remain “Bone Stock”: Engine cases, Engine head and cylinder (No AFTERMARKET aluminum heads allowed, no cylinder spacers allowed), carburetor (re-jetting is allowed. Choke must remain on carb), carburetor manifold, engine appearance (do not paint or coat cases), frame, swingarm, forks, wheels hubs, brakes, fuel tank. (Stock cylinder can be bored/ ONLY stock cylinders allowed!)



Bikes can be modified by changing or adding the following parts: Upper triple clamps, handlebars, grips, brake cable, throttle cable, kill-switch, throttle assembly, sprockets, graphics, tires, piston, rings, exhaust system, clutch springs and plates (clutch must remain fully automatic, NO manual clutches allowed) CDI box, air filter, fork springs, rear shock, chain, sprockets, foot pegs/mounts, skid plates, rims and spokes, shifter and brake lever, seat covers and foam



I called the shop. Classes are exactly like in vegas. Maxxis MiniMoto Adult Classes
 
eighty_HD said:
MM12 Stock/Mod-

The following items must remain “Bone Stock”: Engine cases, Engine head and cylinder (No AFTERMARKET aluminum heads allowed, no cylinder spacers allowed), carburetor (re-jetting is allowed. Choke must remain on carb), carburetor manifold, engine appearance (do not paint or coat cases), frame, swingarm, forks, wheels hubs, brakes, fuel tank. (Stock cylinder can be bored/ ONLY stock cylinders allowed!)



Bikes can be modified by changing or adding the following parts: Upper triple clamps, handlebars, grips, brake cable, throttle cable, kill-switch, throttle assembly, sprockets, graphics, tires, piston, rings, exhaust system, clutch springs and plates (clutch must remain fully automatic, NO manual clutches allowed) CDI box, air filter, fork springs, rear shock, chain, sprockets, foot pegs/mounts, skid plates, rims and spokes, shifter and brake lever, seat covers and foam



I called the shop. Classes are exactly like in vegas. Maxxis MiniMoto Adult Classes


great thats fo vegas, the race isnt vegas
 
[quote name='Campagna']its not even happening anymore i dont think there was a thread somewhere.[/quote



Race at Arizona Honda is still happening for sure. I called the shop. Track is about finished and lots of people have signed up. It is going to be a blast!



They said to be sure to sign up early. They are doing practice from 5-6pm. Youth will be going for the first 15-20 min with the following 40 min as open practice... Riders meeting at 630 with racing to follow.
 
eighty_HD said:
MM12 Stock/Mod-

The following items must remain “Bone Stock”: Engine cases, Engine head and cylinder (No AFTERMARKET aluminum heads allowed, no cylinder spacers allowed), carburetor (re-jetting is allowed. Choke must remain on carb), carburetor manifold, engine appearance (do not paint or coat cases), frame, swingarm, forks, wheels hubs, brakes, fuel tank. (Stock cylinder can be bored/ ONLY stock cylinders allowed!)



Bikes can be modified by changing or adding the following parts: Upper triple clamps, handlebars, grips, brake cable, throttle cable, kill-switch, throttle assembly, sprockets, graphics, tires, piston, rings, exhaust system, clutch springs and plates (clutch must remain fully automatic, NO manual clutches allowed) CDI box, air filter, fork springs, rear shock, chain, sprockets, foot pegs/mounts, skid plates, rims and spokes, shifter and brake lever, seat covers and foam



I called the shop. Classes are exactly like in vegas. Maxxis MiniMoto Adult Classes




They told me I can run stock class cause my motor is stock. So im gonna do stock and mod cause he said its $20 and you can do as many classes as you want
 
1 - 20 of 36 Posts