Just Asking?

XR50forlife · May 12, 2009

Does anyone know if a XR/CRF 70 swingarm will fit on a 2000 XR 50?

Also will the forks of a XR/CRF 70 work on a 2000 XR 50?

THANKS for the help if yall know!!!!!

dirtbkr188 · May 12, 2009

...yep, on both counts...

XR50forlife · May 12, 2009

So they will bolt up with no mod is that right

dirtbkr188 · May 12, 2009

There's a few things you need to do to use the 50 wheels

XR50forlife · May 12, 2009

what has to be done to the wheels?

dirtbkr188 · May 12, 2009

Nothing has to be done to the wheels...

The front brake panel stop has to be trimmed down a bit, a front brake cable end bracket has to be made, and the rear brake panel stop has to be relocated closer to the rear axle hole.

XR50forlife · May 12, 2009

Thanks for the help i got 1997 XR70 swing arm, and i need to move the brake stop back closer to the axle hole thanks again for the info.

doopsx3 · May 12, 2009

I drilled a hole and put a 3/8ths allen bolt in it with the head flattened on 2 sides..used to nuts to lock it in

XR50forlife · May 12, 2009

Thanks for the pics that helps me out alot!

LongMooie · May 12, 2009

i cut the stock 50 tab and spacer off and welded it to the 70 swingarm looks clean

XR50forlife · May 13, 2009

I sure do thank yall for the replies they have helped out so much!

Just Asking?

XR50forlife

dirtbkr188

XR50forlife

dirtbkr188

XR50forlife

dirtbkr188

XR50forlife

doopsx3

XR50forlife

LongMooie

XR50forlife

Top Contributors this Month

Recommended Communities