--------------------------------SOLD----------------------
I built this not sparing a penny and have over 2 grand in polishing and anodizing alone.Every piece of bbr's parts that were anodized were redone.
BBR V3-I rode 4 laps around milestone on it before starting this build.
All of BBR's machine and tooling marks where completly gorund off the frame/swingarm/subframe and then fully polished.
V3 frame supercomp swinger,all 3 adjuster blocks,elka shock
NEW- new style zokes compression and rebound on each leg.
Tripple clamps were stripped then polished and reanodized
Fork tubes were hard anodized
NEW-protapers
NEW- STR kx 65 brake kit with Galfer wave rotor,and steel braided line
NEW-Reeg front hub,Buckhanon spokes, and Excel rim
kx65 brakes front and rear
NEW-Reeg rear hub,Buckhanon spokes, and Excel rim
NEW- 1 off STR kx 65 rear caliper braket,Galfer rotor
New-BBR kickstarter (powdercoated)
New-Two blows skid plate(hard anodized)
White bros Pegs
NEW-Brigstones front and rear
NEW- RK Chain
NEW-Two blows spockets 2 of them(hard anodized)
---------------MOTOR-----------------------
The motor is completely rebuilt and needs to be broken in still
Pax has dynoed this exact combo and it makes 20hp
NEW-Takegawa 178 piston and cylinder
NEW-Tak S35 Decomp Cam
NEW-TAk manual clutch cover(hard anodized)other pieces anodized
Rebuilt +R head with fresh valve job
Kehin 28mm pwk carb
Tak manifold(hard anodized)
Tak primary gear
Tak 4 speed shift drum
Classic honda forged output shaft
NEW-PAX racing dress up kit( anodized)
NEW--black plastics with One industries Rock star graphic kit
NEW--JJW custom back grounds and fork guard kits
NEW-BBR tall seat foam and N-style gripper seat cover(red)
NEW-extra Two blows tall seat complete(black)
ASV C5 shorty brake and clutch lever
These are the parted prices are OBO SHIPPED to the lower 48 states
It would be
scmikegsxr@yahoo.comhttp://i77.photobucket.com/albums/j80/moto50racer/IMG_1310.jpg[/IMG]
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
I built this not sparing a penny and have over 2 grand in polishing and anodizing alone.Every piece of bbr's parts that were anodized were redone.
BBR V3-I rode 4 laps around milestone on it before starting this build.
All of BBR's machine and tooling marks where completly gorund off the frame/swingarm/subframe and then fully polished.
V3 frame supercomp swinger,all 3 adjuster blocks,elka shock
NEW- new style zokes compression and rebound on each leg.
Tripple clamps were stripped then polished and reanodized
Fork tubes were hard anodized
NEW-protapers
NEW- STR kx 65 brake kit with Galfer wave rotor,and steel braided line
NEW-Reeg front hub,Buckhanon spokes, and Excel rim
kx65 brakes front and rear
NEW-Reeg rear hub,Buckhanon spokes, and Excel rim
NEW- 1 off STR kx 65 rear caliper braket,Galfer rotor
New-BBR kickstarter (powdercoated)
New-Two blows skid plate(hard anodized)
White bros Pegs
NEW-Brigstones front and rear
NEW- RK Chain
NEW-Two blows spockets 2 of them(hard anodized)
---------------MOTOR-----------------------
The motor is completely rebuilt and needs to be broken in still
Pax has dynoed this exact combo and it makes 20hp
NEW-Takegawa 178 piston and cylinder
NEW-Tak S35 Decomp Cam
NEW-TAk manual clutch cover(hard anodized)other pieces anodized
Rebuilt +R head with fresh valve job
Kehin 28mm pwk carb
Tak manifold(hard anodized)
Tak primary gear
Tak 4 speed shift drum
Classic honda forged output shaft
NEW-PAX racing dress up kit( anodized)
NEW--black plastics with One industries Rock star graphic kit
NEW--JJW custom back grounds and fork guard kits
NEW-BBR tall seat foam and N-style gripper seat cover(red)
NEW-extra Two blows tall seat complete(black)
ASV C5 shorty brake and clutch lever
These are the parted prices are OBO SHIPPED to the lower 48 states
It would be
scmikegsxr@yahoo.comhttp://i77.photobucket.com/albums/j80/moto50racer/IMG_1310.jpg[/IMG]
