PlanetMinis Forums banner
Cancel
Create thread New Forums

Parts... some stock some High end aftermarket.

Jump to Latest
21 - 37 of 37 Posts
Discussion starter · #21 ·
ricerocket1135 said:
[quote name='chet']so thats a 95 superhead? 1200 huh
Click to expand...


Yep a 95cc superhead(same as a 124cc motor), new cyl, piston, rings and gaskets. I put an additional 200 into a top end cam and 200 into SSteel retainers and SSteel Valves in the head. The Ti valves are low hour valves, and have had problems with the heads popping off... I didn't want to tear it down every other race weekend or ruin more top ends.



It also comes with the external oil cooler...[/quote]



It was referenced to the HEAD not the kit...
 
Discussion starter · #23 ·
Okay now back on topic... Anybody want to buy any parts... I even have a 95cc Takegawa Superhead that utilizes a 54mm bore... If you didn't know... the 124cc super head motors use this exact head.... The heads are the same... so are the pistons... the cylinders are not (mine is shorter), and the cranks are different



now.....





Buy my parts... so my wife doesn't kill me!!!!!!
 
Discussion starter · #27 ·
caddyhacker93 said:
Do you have some bars and a clamp you will sell me?
Click to expand...


Yep... I have a new Sik50's big bar kit that has never been bolted on that I paid 249.95 for like 1 &1/2 weeks ago for my wife's bike... I opened the package and used the stock carb top.... It has everything else. Bars, throttle tube, throttle cable, brake cable, brake lever and perch, and kill switch.





It is a pimp ass setup, but ended up putting my $1,000 dollar front forks and disc brake setup on it off my race bike instead.



200 and you got it...



Blayne

469-338-1656
 
Discussion starter · #35 ·
ricerocket1135 said:
Inner rotor Kit -250 SOLD



2001 Frame -60 SOLD



NEW 2005 Swing arm -30



NEW 2005 Forks -80 SOLD



NEW Honda wheels w/ tires and Brake hubs (front) -120



NEW 2005 CRF Honda Plastics with Seat -75 BACK ON THE MARKET!!!!



Gas tank w/ petcock -60 SOLD waiting on pmt



XR50 Works Shock -250 1ST AT.... 200 BOTTOM DOLLAR



NEW Sik50's Big Bar Kit (never used, pkg opened and stock carb top gone) -200



Classic Honda Ultima SR pipe -250 KEEPING



Fresh HONDA 4spd Bottom End HVOP, HD Clutch Springs, CDI Crank ready for your top end... (CASES BORED TO ACCEPT 54MM PISTON SKIRT) -400





----put the above and below together and get a killer motor----



New Takegawa 54mm cylinder, Piston, rings, gaskets, Superhead (fresh from head shop and has new SS Retainers and Valves) External Oil Cooler Included -1350 w/ carb, intake, and filter.



Blayne

469-338-1656
Click to expand...




May trade the Bottom end for stock motor and some other parts...
 
21 - 37 of 37 Posts
About this Discussion
36 Replies
10 Participants
Last post:
ricerocket1135
PlanetMinis Forums
posts
2.1M
members
63K
Since
2003
PlanetMinis forum is the internet's largest mini bike community. View thousands of photos, event coverage, tips, tricks and performance mods.
Full Forum Listing
Explore Our Forums
CRF50 KLX110, DRZ110, TTR90 Chinese/Import Minis - General Discussion Z50, CT70 and JDM Monkeybikes Complete Bikes For Sale - All makes and models