PlanetMinis Forums banner
1 - 11 of 11 Posts

SunValleyMX

· Registered
Joined
·
428 Posts
Discussion starter · #1 ·
Post up some pics of your kx60 rear wheel setup. Im trying to get an idea of how the brakes hook up because they are different than the 110. The drum is connected on the bottom instead of the top.



Also what size sprocket you runnin? I got a 44 and that seams a little BIG
 
I am currently workin on this set up myself and you will want to get a 39t rear sprocket. Only two places sell them that I know of Two brothers and sprocket specialities (I think). I am workin on gettin mine pc'ed but once I get them back ill post up pics for you.
 
Discussion starter · #4 ·
norway stud said:
how come you didnt like the 44t sproket lolwhats didnt you like because im about to get ne


well i havent had a chance to run the rear wheel yet but i had a 33t on there so i figured a 44t would be too big. Who knows maybe it will be good and i will just go one up on the front
 
I have a 44t, but I had to remove part of my chain guide to get it work otherwise it was easy for the teeth to catch the guide and lock up the rear wheel. :oops:



I had a 15t but am installing a 16t.



I like running larger sprockets to try to raise the chainline and keep the chain from sawing through the front of the swingarm.
 
SunValleyMX said:
well i havent had a chance to run the rear wheel yet but i had a 33t on there so i figured a 44t would be too big. Who knows maybe it will be good and i will just go one up on the front


The 44 tooth with a 14 front sprocket is a really good gearing,, this is what BBR runs in vegas with the stock clutch and a 44/13 with the 6 disc clutch



NOTE: I have 2 KX60 rear sprockets in a 44 tooth, both are Renthal silver and in good condition. $40 each or both for $60 shipped.
 
1 - 11 of 11 Posts