Has anyone on here run one of the "Yoshi" carbs yet and what's your experience? In comparison to the Mikuni's, what's different and which do you prefer? Thanks
Yoshimura TM-MJN24 Carb
HymieP
1 - 20 of 119 Posts
Joined
·
3,026 Posts
Hands Down the best damn carbs ive ever worked with.
Im running a Yosh MJN-TM24 on my 95cc motor and a MJN-TM26 on my 115 ape.
I posted a thread a while back with my experiences with them. I think TMAS has one of these carbs now as well.
The MJN design places small holes along the sides of the hollow needle to atomize fuel at the center of the carburator throat which is the point of highest intake velocity. This provides improved throttle response and horsepower at low and mid-range rpm. Peak power is also higher because the main jet is allowed to flow more fuel with less restriction. The pilot circuit is stopped when the throttle is closed in order to prevent run-on which keeps the combustion chambers cleaner.
the carb is also thermal transdusive coated inside and out to reduce heat.
![Image]()
Im running a Yosh MJN-TM24 on my 95cc motor and a MJN-TM26 on my 115 ape.
I posted a thread a while back with my experiences with them. I think TMAS has one of these carbs now as well.
The MJN design places small holes along the sides of the hollow needle to atomize fuel at the center of the carburator throat which is the point of highest intake velocity. This provides improved throttle response and horsepower at low and mid-range rpm. Peak power is also higher because the main jet is allowed to flow more fuel with less restriction. The pilot circuit is stopped when the throttle is closed in order to prevent run-on which keeps the combustion chambers cleaner.
the carb is also thermal transdusive coated inside and out to reduce heat.
Joined
·
7,005 Posts
Joined
·
3,026 Posts
HymieP said:
Here are two pics of the billet swivel intake.
Joined
·
590 Posts
Here...get the rad wallpaper from Yoshi...
http://www.yoshimura-jp.com/en/products/images/081126_monkey_1280.jpg
http://www.yoshimura-jp.com/en/products/images/081126_monkey_1280.jpg
Joined
·
1,043 Posts
Man that swivel is sweet.
~Shawn
~Shawn
Joined
·
577 Posts
i was looking at these carbs also
i currently use a mikuni vm28 flatslider on my honda nice motor
(180cc daytona dohc)
i was looking at this carb mjn tmr 28 flatslider its so trick!
it also has an accelerator pump !?
what benefit would i have with this
cheers
adam
i currently use a mikuni vm28 flatslider on my honda nice motor
(180cc daytona dohc)
i was looking at this carb mjn tmr 28 flatslider its so trick!
it also has an accelerator pump !?
what benefit would i have with this
cheers
adam
Attachments
1 - 20 of 119 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
