PlanetMinis Forums banner
1 - 2 of 2 Posts

· Registered
5,278 Posts
The adapter brackets for the calipers front and rear are for specific calipers (Front is a CR85 and the rear is a KX65). Both Caliper mounts in the kit will not adapt the Pitster calipers.

You can run the calipers with the YZ master cylinders though but the feel is a little different.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.