PlanetMinis Forums banner

xr 50 tard

2020 Views 17 Replies 7 Participants Last post by  LILFIFTY
well ive been watching motard racing more and more and would liek to get my 50 setup on the street. i've seen the bolt up motard wheels with tires sets for around $200 i've got an 88 kit and well it'll need a clutch soon. But back to the motard question can i rock the stock forks with 1+ forks hd springs and i have a decent shock in the back. everything else is stock except a tall sgr seat. been scopin out some lots that i may be able to run and this looks like somethin i could get into cuz i'm into street bikes. so help a newb tard out :)
1 - 2 of 18 Posts
LILIFIFTY .., Just in case you didn't know ??

A used XR/CRF 70 swingarm that needs to be slightly moded to work on a 50 .., can usually be had for cheap on here and will get you where you need to be to match the front end set up that you have now .

This is one of mine .. Yours will sit like this too with the swinger added ..

It has the +1 forks with hd springs , a 70 swingarm , a KLX110 shock , stk rims with hd spokes with 3.0 x 10 SL 26's front and rear .

See less See more
would ading the 70 swinger or any other swinger help with that? i'm thinking about getting some forks and swinger combo this spring if money permits.

For every inch of extension you add ..., that's roughly how much higher you will get the bike off the gound .. ;)
1 - 2 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.