PlanetMinis Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
241 Posts
Discussion Starter · #1 ·
Ok so I'm not real happy with the as-02's I have at the minute.

I've being checking out the 07 x4 forks that pitster has on sale.



I think they will just slip into the triple clamps I have.



Would thy be a good upgrade over the as02, what do you reckon??
 

·
Registered
Joined
·
7,611 Posts
I have both...the As02's are ok but when I got the PisterPro/GPX forks...I quickly noticed the difference..they operate more like my YZ250 forks...(much better I say than As02)...I have not put on the X4 forks yet because they use a different tripple set-up than the AS02's....you will need an upper clamp that is 45mm in size and lower that is 48mm......FastAce AS02 is 48mm top and bottom.......your bottom clamp will work tho
 

·
Registered
Joined
·
33 Posts
If your gonna run pitster forks I suggest the 08s over the 07s . They have compression on and rebound adjust on both legs. The 07s have rebound adj on one and comp. on the other. Tougher to get dialed in although they are on sale real cheap. I can get you deals on the whole setup. If you need clamps and other parts to make it work. Also pitster offers the whole front end for under $600 for 07s and I think $650 for 08s.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top