PlanetMinis Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
5,741 Posts
Discussion Starter · #1 ·
Hey all, I have a Lifan 120 base, bored and stroked to 155cc. You can find additional information in this thread here as I have listed it previously.



http://www.planetminis.com/f69/lifan-155cc-built-works-103068.html



Base: Lifan 120

Crank: GPX120 with 6mm stroker pin so 63mm stroke. 13mm pin

Cases: Upgraded thicker right side case from PItsterPro140

Cylinder: 56mm Trailbikes

Piston: 56mm Trailbikes

Head: Lifan BVH w/HD SPrings

Cam: Z40 cam

Clutch: TRX90 Plates with HD springs

Tranny: Upgraded SDG Shift Star

Ignition: Chinese Rotor for Lights or Inner Rotor: Your Choice

SLing: Lightened Stock (not an aluminum one that can break)



I'm looking to get $400 plus shipping on it. It is complete and together and ready to rock.



However, I also need a few things so I am willing to trade for them if you are interested.



Here is what I need:

1. Set of CT70 Wheels with hubs and brakes

2. Fast Ace 01 or 02 front forks and trees

3. Complete set of xr70 forks with trees

4. 17/14 wheel set

5. Chinese motard wheel set

PM me or jarred dot markel at gmail dot com
 

·
Registered
Joined
·
5,741 Posts
Discussion Starter · #7 ·
Pierce said:
What would it take to bolt this into a ct70 and hook it up to the 12v wiring harness?


It would take you to take the two bolts and bolt it into your bike. And then it would take you 5 wires to hook to your 5 wires and you're done. Easy Peasy.



As for why I'm selling it? I have 3 spare motors sitting on my shelf. One is slated for a vintage racer project and the other is slated for a Skyteam project leaving one for spare...and since I won't be starting those projects for a very long time due to me just having a baby, I plan on unloading some stuff.
 

·
Registered
Joined
·
356 Posts
interested in some new, never installed 1 piece aluminum CT70 wheels, bearings, drive cushion with new 120/90-10 tubeless Kenda rubber (stock Ruckus meats) and used brake plates w/ speedo drive and 1/2 worn pads?



If you're in the L.A. area for work, throw them in your luggage:p
 

Attachments

1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top