PlanetMinis Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter #1
For sale is a Honda CRF100 Conversion that is in immaculate condition. Bike has been custom built using nothing but the best parts available, including some one off parts that have been hand crafted/machined/welded by BBR Motorsports, so it truely is a one of a kind. It has never been raced and been ridden only once. Right now its just sitting in the garage collecting dust, and with Christmas coming up, needs to go to a good home where she can be ridden and appreciated.



Currently local Honda shops have new 2012 CRF100's on the showroom floor for $2,880 + tax, freight & setup. For $3,500 you get a race ready, custom built, handcrafted CRF100 (actaully 120cc) that is in showroom condition. This really is the little CRF Honda should have built!!



List of the mods include:



-Modified Honda OEM frame with Three-Position Upper Shock Mount and 2011 Honda CRF70 Bodywork

-Custom BBR Aluminum Swingarm (Linkage-less Design)

-Elka Remote Resevoir Rear Shock with compression and rebound clicker adjustment w/1100lb spring

-35mm DNM Inverted Front Forks with compression and Rebound adjustment

-BBR Aluminum Chain Guide

-'OEM modified Airbox

-'OEM Front/Rear Hubs, Brake Panels (machined and ceramic coated/ Titanium color)

-Excel Aluminum Rims, Black Anodized, 14"/17"

-Buchannon's H/D Spokes 14"/17"

-Michelin Starcross Tires

-PBI Aluminum Rear Sprocket 46th

-PBI Steel Countershaft Sprocket 14th

-RK 420 Gold Chain

-Machined aluminum Rear Brake Rod Holder (anodized blue)

-Machined aluminum Front/Rear Wheel Spacers (anodized blue)

-EBC Front/Rear Brake Pads

-Aluminum Frame Guards (polished)

-Fastway Adjustable Footpegs

-BBR Frame Cradle (brushed aluminum)

-BBR Aluminum Brake Pedal Tip (polished)

-BBR Aluminum Shift Lever

-OEM XR75 Kickstarter

- Machined aluminum Steering Stem

- BBR aluminum Steering Stem Nut (anodized blue)

-BBR Tapered Steering Bearings

-APPLIED "Mini Works" Bend Handlebars (anodized black)

-TAG Soft Compound Grips

-APPLIED "On the Fly' Clutch Perch/Lever

-Shorty Front Brake Lever/Perch

-TK Racing Aluminum Motor Mounts

-BBR Aluminum Gas Cap

-Throttle Jockey Seat Cover

-Custom Shroud/Side Panel Graphics by SCR



Motor:



-Honda XR100 Engine

-2011 OEM XR100 Electronic Igntion System

-BBR 120cc Bore Kit

-Powroll Race Grind Camshaft

-2011 CRF150F 24mm Keihin Carb (42 pilot/115 main)

-OEM XR100 Intake Manifold (ported)

-Port and Polished Cylinder Head

-UNI Air Filter

-IKAT Spark Plug Wire

-NGK Spark Plug Cap

-Custom Exhaust System

-EBC CR85 Clutch Fibers, Steel plates

-BBR H/D Clutch Springs

-Lightened Flywheel

-BBR RevBox



Plus extras



Please feel free to email with any questions.
 

Attachments

·
Registered
Joined
·
1 Posts
For sale is a Honda CRF100 Conversion that is in immaculate condition. Bike has been custom built using nothing but the best parts available, including some one off parts that have been hand crafted/machined/welded by BBR Motorsports, so it truely is a one of a kind. It has never been raced and been ridden only once. Right now its just sitting in the garage collecting dust, and with Christmas coming up, needs to go to a good home where she can be ridden and appreciated.



Currently local Honda shops have new 2012 CRF100's on the showroom floor for $2,880 + tax, freight & setup. For $3,500 you get a race ready, custom built, handcrafted CRF100 (actaully 120cc) that is in showroom condition. This really is the little CRF Honda should have built!!



List of the mods include:



-Modified Honda OEM frame with Three-Position Upper Shock Mount and 2011 Honda CRF70 Bodywork

-Custom BBR Aluminum Swingarm (Linkage-less Design)

-Elka Remote Resevoir Rear Shock with compression and rebound clicker adjustment w/1100lb spring

-35mm DNM Inverted Front Forks with compression and Rebound adjustment

-BBR Aluminum Chain Guide

-'OEM modified Airbox

-'OEM Front/Rear Hubs, Brake Panels (machined and ceramic coated/ Titanium color)

-Excel Aluminum Rims, Black Anodized, 14"/17"

-Buchannon's H/D Spokes 14"/17"

-Michelin Starcross Tires

-PBI Aluminum Rear Sprocket 46th

-PBI Steel Countershaft Sprocket 14th

-RK 420 Gold Chain

-Machined aluminum Rear Brake Rod Holder (anodized blue)

-Machined aluminum Front/Rear Wheel Spacers (anodized blue)

-EBC Front/Rear Brake Pads

-Aluminum Frame Guards (polished)

-Fastway Adjustable Footpegs

-BBR Frame Cradle (brushed aluminum)

-BBR Aluminum Brake Pedal Tip (polished)

-BBR Aluminum Shift Lever

-OEM XR75 Kickstarter

- Machined aluminum Steering Stem

- BBR aluminum Steering Stem Nut (anodized blue)

-BBR Tapered Steering Bearings

-APPLIED "Mini Works" Bend Handlebars (anodized black)

-TAG Soft Compound Grips

-APPLIED "On the Fly' Clutch Perch/Lever

-Shorty Front Brake Lever/Perch

-TK Racing Aluminum Motor Mounts

-BBR Aluminum Gas Cap

-Throttle Jockey Seat Cover

-Custom Shroud/Side Panel Graphics by SCR



Motor:



-Honda XR100 Engine

-2011 OEM XR100 Electronic Igntion System

-BBR 120cc Bore Kit

-Powroll Race Grind Camshaft

-2011 CRF150F 24mm Keihin Carb (42 pilot/115 main)

-OEM XR100 Intake Manifold (ported)

-Port and Polished Cylinder Head

-UNI Air Filter

-IKAT Spark Plug Wire

-NGK Spark Plug Cap

-Custom Exhaust System

-EBC CR85 Clutch Fibers, Steel plates

-BBR H/D Clutch Springs

-Lightened Flywheel

-BBR RevBox



Plus extras



Please feel free to email with any questions.
How did you get the CRF 70 plastics to fit on it. Did you swap out the gas tanks as well or use the 100’s gas tank
 
1 - 9 of 9 Posts
Top