PlanetMinis Forums banner

will a ktm 65 swing arm mount up with a stock klx 110 frame and do i need a dif shock

1277 Views 5 Replies 5 Participants Last post by  Busser90

pm me
1 - 6 of 6 Posts
you have to relocate the shock bracket and bu a different shock takes some fab work
do some modifications on the swinger then it will fit my friend did it and it worked
needs to be fit to the klx frame

i have done it, its not that hard if your good with fabrication
Needs to be spread to fit the klx frame. and you need to relocated the mount on the swinger..

Not all that hard but just time consuming
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.