the clutch needs to be adjusted
Wierd problem with tb clutch kit
Hey guys, I have been have some wierd problems with my trail bikes clutch lately. Here is what is going on. Sometimes when I kick through a cycle, the engine feels like it has no compression. It feels like when I try to kick it over with the clutch pulled in. But other times I kick it through it is normal and starts fines. Anyone have any idea of what is going on?
1 - 5 of 5 Posts
Yeah the clutch is being engaged when it shouldn't be so yeah it most likely needs to be adjusted
Chances are you have too little or no free play at the lever causing the clutch to be held slightly disengaged. This will wear out the throwout bearing and the clutch pushrod pretty quickly if you don't fix it.
thanks for the help guys. Ill loosen up the adjustment and see what she does!
1 - 5 of 5 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
PlanetMinis Forums
PlanetMinis forum is the internet's largest mini bike community. View thousands of photos, event coverage, tips, tricks and performance mods.
Full Forum Listing
