Who here has a FOES billet rear brake pedal/lever??

A friend of mine will post here over the next day with the measurements he needs to adapt this to a custom application.



Dilligaf will be posting. Please take the time to answer his questions, as he's good people. He wasn't getting a response from his original post, so I thought I would help him out.



Thanks in Advance.



Dan

five0addict said:

what do you need to know?

Click to expand...

G'Day,



thanks Dan and whoever responds to this questions.



yes, its approx. 1 inch longer compared to stock lever.

would like to fit the Foes brake lever onto a Z50 style bike (called a Monkey bike).



1) distance between the big hole and the hole where the brake rod attaches.



2) diameter of the big hole that slides on the frame and length of piece that slides onto the frame bracket



3) distance between the big hole and the bracket that holds the spring (spring that pulls the brake lever up).



in case you have one of the Foes brake levers send me a PM or e-mail and will send you a picture via e-mail with the required mesurements.



Thanks in advance for any help offered!

3 3/4" from big hole to rod mount

hole diameter is 9/16"

width of rocker hole 1 15/16"

center of big hole to spring hole 1 7/8"

from big hole to bend up 5 1/4"

1/2" from back of big hole to spring thing.





the lines are 1/2" apart