PlanetMinis Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
2,902 Posts
Discussion Starter · #1 ·
Which cam would work better out of these two for a bike with a 75cc kit. These are from classic honda



Performance HRC Cam. Good performance band from 5,000 - 9,000 RPM Range. All CDI Motors





or



Cam, Kitaco, CDI. Touring cam for the stock head. ALL XR's $75.00

 

·
Registered
Joined
·
202 Posts
The HRC cam only works in the 70style head. I just had this happen when I went to install it. I threw a 70 head on w/this cam and it works so good.

Go w/kitaco cam if keeping the stock style head.
 

Attachments

·
Registered
Joined
·
8,362 Posts
Cam which one ????

Yep,

the KITACO..... Good rpm range what carb. you using??
 

·
Registered
Joined
·
8,362 Posts
reply to Carb

Hey Mx,

I would stay with your stock carb, and get a foam air filter.

or just go to an 18mm carb. Unless you go with some head work,

or aftermarket head the 20mm is overkill.. Just my opinion.



Hope this helps OLDSCHOOL
 

Attachments

1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top