PlanetMinis Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
23 Posts
I had the same problem with mine going to a 180m is way to rich you have to lean it out. your pilot jet is fine if your not bogging in the low end so try running a 115-130 main and play with your clip position. Also note that you will need a u filter or pancake filter and, it will help getting a pipe or do a pipe mod by drilling the restricter out of the pipe located at the bottom of pipe where it connects to your head. Hope this helps
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top