PlanetMinis Forums banner

Video on how to wind the atc70 coil in under 3 minutes!

795 Views 6 Replies 2 Participants Last post by  tmas
Figured out how to wind the coil in less than 3 minutes so I made a video to help others.
1 - 4 of 7 Posts
Good video. You make it look easy. (y) Those springs are a PIA to wind up. Have you ever done a TRX70 pullstarter spring?
tmas
  • Like
Reactions: 1
Is the trx70 recoil different? I have also done a few 4-zinger coils.
Have a look at this thread. I did it years ago. At the beginning of the summer the knot at the handle let go and I have to do it again.
tmas

TRX70 Pull Starter
  • Like
Reactions: 1
Looks like the zinger coil. I used the drill method. Just be very careful and go slow. The drill can snap the coil if you
馃檹 Thanks. I will have to try that method.
tmas
  • Like
Reactions: 1
I finally got my TRX70 pullstarter fixed. If anyone finds an easy way let me know. It was a a real PIA to install.
It took 2 people.馃憥馃挭馃敡
The ATC70 pullstarter is a lot easier. I tied a huge knot 馃挭so it won't go through the handle again. Just glad I got it fixed because they are hard to find.
I am going to update THIS thread soon.
tmas


tmas
Gas Household hardware Wood Metal Wire
See less See more
  • Like
Reactions: 2
1 - 4 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top