[Quinc]

Figured out how to wind the coil in less than 3 minutes so I made a video to help others.

 

[tmas]

Good video. You make it look easy. Those springs are a PIA to wind up. Have you ever done a TRX70 pullstarter spring?
tmas

 

[Quinc]

Good video. You make it look easy. Those springs are a PIA to wind up. Have you ever done a TRX70 pullstarter spring?
tmas

I have done a lot if them and used everything from drills to zip ties to do them. Tried this and it was by far the easiest and quickest way I have found yet. Is the trx70 recoil different? I have also done a few 4-zinger coils.

 

[tmas]

Is the trx70 recoil different? I have also done a few 4-zinger coils.

Have a look at this thread. I did it years ago. At the beginning of the summer the knot at the handle let go and I have to do it again.
tmas

TRX70 Pull Starter

 

[Quinc]

Have a look at this thread. I did it years ago. At the beginning of the summer the knot at the handle let go and I have to do it again.
tmas

TRX70 Pull Starter

Looks like the zinger coil. I used the drill method. Just be very careful and go slow. The drill can snap the coil if you go to fast.

 

[tmas]

Looks like the zinger coil. I used the drill method. Just be very careful and go slow. The drill can snap the coil if you

🙏 Thanks. I will have to try that method.
tmas

 

[tmas]

I finally got my TRX70 pullstarter fixed. If anyone finds an easy way let me know. It was a a real PIA to install.
It took 2 people.👎💪🔧
The ATC70 pullstarter is a lot easier. I tied a huge knot 💪so it won't go through the handle again. Just glad I got it fixed because they are hard to find.
I am going to update THIS thread soon.
tmas


tmas