[Zachmotox179]

Ok I have about $350 to spend on my stocker 110. What do you reccomend i spend it on for upgrades? also if you have anything for sale that you would reccomend let me know

 

[flyn62]

suspension would be nice. maybe find a nice used shock and 60 forks or somethen.

 

[kawasakifan700]

Comfort first... engine later

 

[MX18]

suspension

 

[Zachmotox179]

anyone have any tall bars, rear shock ,or kx 60 front forks their trying to get rid of?

 

[flyn62]

check ebay or the classifieds

 

[507 brett]

i got a fox float. it needs to be rebuilt tho. its got a bad air leak. probly not werth the time.

yea find sum bars and go from there

 

[Dr.Wreck]

yeah dude, bars make it feel like a COMPLETELY differnt bike, so much easyer to jump

 

[RcWannabe]

Yeah Bars are the first thing you want to do I have used both Pro taper and Red baron mx bars. I prefer the pro tapers even though the rb bars look a little nicer. Second do hd springs if you cant afford any other susp. Then do the free mods to your air bix and pipe and re jet

 

[Zachmotox179]

ok what are those free mods? would getting hd springs even really make that much of a differance or is it almost a waste of money? anyone got any bars? I looked in the classifieds but didnt see much

 

[rford426]

the springs will hold you over till you can get suspension i rode my last 110 the whole time with hd springs they were worth it to me...but do your suspension before your motor for sure

 

[flyn62]

damping rods with springs are very similar to 60 forks and feel great

 

[Zachmotox179]

so if i do damping rods and springs i basically wont even need to bother with getting 60 forks?how about this for forks?...



Mini Bike Springs KLX110 Heavy-Duty Fork Springs

Two Bros. Long Travel Damping Rods (Set of 2) - KLX110 and DR-Z110

 

[raisen727]

if u can find a pair of 60 forks snag them cause they will give u more travel over the 110 forks and free mods is like drilling the stupid washer welded in the header of the pipe and airbox u remove the snorkel that goes inside the frame

 

[Zachmotox179]

taylor haha I will just dropp it off with you to work on while i go crash more of your bikes and keep up my record for most injuries at your house!

 

[fastestkidaround]

man get the www.minibikesuspension.com stiff springs, a used shock like ishock or works for a cheap price like 150 bux for a good condition one, and some bars like pro taper or some renthals. U can get Renthals for 40 bux on ebay thats where i got mine . Then work on the other stuff And the pipe mod is were u take the head pipe and drill out that lil tiny hole. After that I would get a Full exhaust system and a pod filter. Great pipes IMO are the Pro Circuit, Two Bros M-6. Those are the ones i came down to. And then u will have to rejet. Try a 85 main and 40pilot. thats what Im running. and u will have to get a size 6 washer and raise the needle and install those jets and you should have a nice running bike with a good amount of power over stock i love mine. Good luck hope this helped.

 

[Zachmotox179]

bump for the night see what else people have to say.THanks for all the help so far it is much appreciated

 

[fmfracertccra]

I would buy a triple clamp/bar kit... and pegs and tall seat.. than upgrade the forks than a shock..

 

[bobbob1015]

suspension would be nice. maybe find a nice used shock and 60 forks or somethen.

careful with used shocks....

 

[king110]

Some longer peg mount bolts would probably be the cheapest must do mod. If you do any sort of jumping a hd peg mount is needed. You will fold the stock one pretty quickly.