PlanetMinis Forums banner

Throttle cable

465 Views 4 Replies 4 Participants Last post by  kawi122
Well I tried to do a search but I did not find anything pertaining to my issue. I have a CRF50 with a 50 Stunt tall bar kit. And I am running a 125cc with a 22mm Mikuni carb.

The issue I ran into was the cable doesn't work with the Mikuni carb, Because the exposed wire isn't long enough to go into the slide. (I think that is the right term.) But I am having issues finding one that will fit the carb right and also be long enough for the tall bars. The one I got from a friend works with the carb but isn't long enough for the tall bars.

I was wondering if anyone had a link to someone that has what I need or maybe any ideas of what I could try.

Thanks for your help.
1 - 1 of 5 Posts
what throttle u have dude.I hadto buy a aftermarket throttle that t bolt has for 20 bucks and its the hrc one and it damn woth the 20 for sure then i have the braided cable from wholesale-cycle i thinks its the 160-r cable and its plenty lons.I had the same problem with my bbr throttle that was basically a stock setup the cable that came with my 140 wouldnt work so i bought the hrc throttle which is basically the billet pitster pro throttle except the hrcone has a plastic throttle tube but cost 40 less too lol.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.