PlanetMinis Forums banner

Throttle cable

464 Views 4 Replies 4 Participants Last post by  kawi122
Well I tried to do a search but I did not find anything pertaining to my issue. I have a CRF50 with a 50 Stunt tall bar kit. And I am running a 125cc with a 22mm Mikuni carb.

The issue I ran into was the cable doesn't work with the Mikuni carb, Because the exposed wire isn't long enough to go into the slide. (I think that is the right term.) But I am having issues finding one that will fit the carb right and also be long enough for the tall bars. The one I got from a friend works with the carb but isn't long enough for the tall bars.

I was wondering if anyone had a link to someone that has what I need or maybe any ideas of what I could try.

Thanks for your help.
1 - 1 of 5 Posts
your local dirtbike shop should be able to make you a cable, using the outer cable from the 50 stunt kit.

i had my buddy at the shop make me a clutch cable because i wanted to ride while waiting for my motion pro

EDIT: you're in so-dak so what i said above will be difficult, unless a dealer will do it.

i used to live in watertown.
See less See more
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.