PlanetMinis Forums banner
41 - 60 of 91 Posts

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #41 ·
We have been speeding up our services for TB parts

Our goal is every TB part kits and product in STOCK and Shipping SAME day for online orders received.



We also will be offering TB - Mikuni - Kiehin carb choices at discounted prices with any TB kits



We are 100% committed to TB parts and PM !
 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #43 ·
monkeybikeguam said:
Been get my parts from Vince at Tbolts USA. quick about 5 -7days at least;)Good service!


Thanks man,

But that's to you in GUAM !!

Our Free Priority mail with new increased stock levels should yield 1-3 days in cont USA
 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #44 ·
Customer Review of V2 head kit



"Hey vince,

Just bought your v2 head for my 143cc and it rips, I appreciate the talk we had on the phone and coming to the conclusion for buying the v2 head. Couldn't be happier. Left a 5 out of 5 on the review page for ya"



Free shipping on ALL TB kits in USA
 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #45 ·

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #46 ·

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #48 ·


Back in stock !
TBparts Race Head kits
[h=1]TB Race Head, 88cc Big Bore & 20mm Carb Kit
Z50 CRF50 XR50 CRF70 & Pit bikes
Part No: TBW0936[/h]



SPECIAL
includes Oil Pump, CDI, Main Jet Kit, and Clutch Cover Gasket for the same price as our regular kit

Trail Bikes Race Head, 88cc Bore & 20mm Carb Kit

This is the Race Head 88 kit that everyone is talking about

Performance and Price make Mike's Honda Trail Bike 88 w Race head a real winner

Race Head, 88cc Big Bore kit, and 20mm Carburetor Performance Kit:

- Lightweight aluminum cylinder with steel sleeve

- Cast in mounts on cylinder for aftermarket skid plates

- Oversized cooling fins on cylinder for efficient heat dissipation

- 52mm piston with rings, pin, & clips

- Head gasket kit

- High performance race camshaft

- Race Head – Larger valves (25mm intake & 22mm exh) and porting for increased performance. Also has bigger cooling fins. Includes all necessary parts. Comes disassembled.

- 20mm Performance carb assembly. Includes: 20mm carb, intake, heatstop, gaskets, mounting hardware/wrench, air filter (not shown in pic) and long throttle cable


 

· Registered
Joined
·
90 Posts


Back in stock !
TBparts Race Head kits
[h=1]TB Race Head, 88cc Big Bore & 20mm Carb Kit
Z50 CRF50 XR50 CRF70 & Pit bikes
Part No: TBW0936[/h]

http://tboltusa.com/store/images/0936.JPG
SPECIAL
includes Oil Pump, CDI, Main Jet Kit, and Clutch Cover Gasket for the same price as our regular kit
Trail Bikes Race Head, 88cc Bore & 20mm Carb Kit

This is the Race Head 88 kit that everyone is talking about

Performance and Price make Mike's Honda Trail Bike 88 w Race head a real winner

Race Head, 88cc Big Bore kit, and 20mm Carburetor Performance Kit:

- Lightweight aluminum cylinder with steel sleeve

- Cast in mounts on cylinder for aftermarket skid plates

- Oversized cooling fins on cylinder for efficient heat dissipation

- 52mm piston with rings, pin, & clips

- Head gasket kit

- High performance race camshaft

- Race Head – Larger valves (25mm intake & 22mm exh) and porting for increased performance. Also has bigger cooling fins. Includes all necessary parts. Comes disassembled.

- 20mm Performance carb assembly. Includes: 20mm carb, intake, heatstop, gaskets, mounting hardware/wrench, air filter (not shown in pic) and long throttle cable
Have you guys got any parts for the crf110 back in stock ?

Sent from my iPhone using Planet Minis
 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #50 ·
Back in stock

[h=1]TB DRZ110 KLX110 Manual Clutch Kit
Part No: TBW0343[/h]



DRZ110 and KLX110 Manual Clutch Kit

This new manual clutch kit is Trail Bikes latest performance offering for the KLX110/DRZ110. Like hydraulic actuated clutch kits on the market today, this kit uses the stock clutch. However, the similarities between the two end there. It's much easier to install with no hassles of bleeding lines and you never have to worry about the loss of hydraulic fluid during a ride or race. Additionally, use of the clutch lever is optional. The clutch kit can be used as a semi-automatic like the stock setup or you can choose to use the clutch lever to engage the clutch operating it like a manual clutch. This feature is great for teaching kids or a novice rider how to use a manual clutch. Also, if you crash during a race, the engine is less likely to die with this type of setup. This kit works great and is nearly half the price of hydraulic kits that offer the same function. Please see the Performance Info section for downloadable installation instructions (link is on lower left side of this page). ***UPDATE*** The kit now inlcludes a primary clutch removal washer that allows you to convert to a full manual clutch if desired. Use of this washer also removes two pounds of weight off the crankshaft resulting in quicker engine response.

 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #51 ·
[h=1]TB DRZ110 KLX110 143cc W/ Race Head and VM26mm Mikuni Carb
[TBW0988][/h]

Date Added: Monday 24 June, 2013[h=2]by brently m.[/h]
Just got the kit a few days ago and my bike turned into an animal


 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #52 · (Edited)
This Info was just sent to dealers last week
Sorry I was working all weekend and didnt have a chance to update our web site or post it here till now
Wanted to get the CRF110 news out first

IF Customers have questions or concerns about recent TBOLTUSA.COM
orders of the V2 KLX110 Race heads please feel free to contact me directly
Please have your order number in the email
Contact:
[email protected]

The following improvements have been made to the KLX110 style V2 Race Head:

- Now comes with forged aluminum roller rockers
- Bushings rollers have been replaced with a bearing rollers
- Intake valve is now stainless EV8 like the exhaust valve

Also, there is no price increase on the head kits with these improvements.

TB 825 V2 Aluminum Rocker kit - KLX Type
Part No: TBW0825
Location: 218I





Upgrade and Replacment Lightwieght Roller Rockers for TB V2 Heads ONLY
Fits TB V2 Head KLX Type


 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #55 ·
[h=1]back in stock !!

TB Triple Clamp kit Z50 72-99
Part No: TBW9075
Location: 220A
[/h]





This kit replaces the stock triples so you can use Kawasaki KLX110 front forks on the front end of your Z50. KLX110 forks work infinitely better than the stock forks and they are readily available used at good prices. The kits include following items:


 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #58 ·
[h=1]28/26mm intake kit for KLX110 race head
Part No: TBW0362
Location: 218F
[/h]



TB Intake Kit for 26/28mm carbs on 110 race head

Kit includes a intake for the Race Head (or ported stock head), heatstop, gaskets, mounting bolts/wrench


 

· Registered
Joined
·
836 Posts
Just to make sure I am reading this correct. I dont need the TB Cam Sprocket for KLX & DRZ110 2010 UP to use this head on an 04? I think it means I don't need it but I would like to make sure.


TB DRZ110 KLX110 RACE HEAD
Part No: TBW0598
Location: 220E
TB DRZ110 KLX110 RACE HEAD1


For 02 - UP
2010 Up must use
TB Cam Sprocket for KLX & DRZ110 2010 UP
For TB Race Heads
[TBW0645] NOT INCLUDED

This Race Head has larger valves and ports for significantly increased performance over the stock head.
This is the head with the valves installed Race cam and covers AS SHOWN
 
41 - 60 of 91 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top