PlanetMinis Forums banner
21 - 40 of 49 Posts

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #21 ·
TB CRF110 - Big Valve Kit
Part No: TBW0888





TB CRF110 - Big Valve Kit
+1.5mm intake and +0.5mm exhaust valve kit for the 2013 Honda CRF110.
Our oversized valves are constructed out of EV8 stainless steel to provide superior strength and longevity over the factory valves.
They are also lighter than the factory valves. Additionally, the valve profiles have been changed to yield better flow characteristics resulting in better performance.
With these oversized valves you get the best of everything as the stainless material will long out live the stock valves, the bigger size will yield more flow thus yielding more power, and the lighter design will help prevent valve float give providing the potential to rev higher and faster and it frees up horsepower used to open and shut the heavier stock valves.


Note: This kit should be installed by a professional mechanic or shop that offers valve job service as the valve seats must be cut to accept the larger valve head diameters and valves sunk deeper to allow for overlap clearances. The kit includes a document that includes protrusion and installs heights specs.


 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #23 ·
[h=1]TB CRF110 132cc 55mm Big Bore with Big Valve Kit and Carb Kit
Part No: TBW9139[/h]



TB CRF110 132cc 55mm Big Bore with Big Valve Kit and Carb Kit
CRF110 132cc 55mm Bore Kit
Top Quality Kit
Big Performance Boost
-Carb Kit that includes the new reverse intake, VM26, airfilter, and throttle cable

-Big Valve Kit
+1.5mm intake and +0.5mm exhaust valve kit for the 2013 Honda CRF110.

 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #26 ·

· Registered
Joined
·
4,606 Posts
If you guys want a really cheap excellent upgrade scoop a stock 110 carb, super easy to jet and i want to say the bolt up to the manifold not hundred percent sure. I had a buddy do it to his and it woke the stock crf110 up INSANE. It will eat a klx110 for breakfast just with the klx110 carb.
 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #32 ·
Bump

[h=1]BBR Aluminum Folding Shift Lever +1/2" / CRF110F 13-Present
Part No: 537-BBR-1009
Location: 108 D
[/h]




Folding tip, forged aluminum shift lever from BBR Motorsports.
Stronger and lighter than the stock shift lever, with a beautiful anodized (titanium color) finish.

• 1/2" Longer than stock
• Strong forged aluminum construction
• Steel knurled folding tip (chrome plated)
• Anodized titanium finish
• Laser etched BBR logo

 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #33 ·
We can ship these again in a few days

[h=1]BBR CRF110 Skid Plate
Part No: 320-HCF-1131[/h]




3/16" thick tig welded 6061 aluminum. Bolt-on protection for your engine. Installs in minutes. Only the finest in materials and craftmanship. All hardware included. HAND MADE IN USA.
• 6061 aluminum
• Tig welded construction
• Bolts on in minutes
• HAND MADE IN USA

 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #35 ·
Whoa! So BBR didn't just give up.. It's about time they get them shipped out. Next up, swing arms!
No Sir BBR is def still at it with CRF110 and im hoping to re-list the super stock swingarms and damper rods soon

So is TB Parts and were getting more new CFR110 parts from TB listed soon too
 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #38 ·
[h=1]TB CRF110 Reverse Intake Kit For 18mm-22mm Carbs
Part No: TBW0865
Location: 218F
[/h]



TB CRF110 Reverse Intake Kit For 18mm-22mm Carbs
19mm Mikuni
TB 20mm
22mm Mikuni

 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #39 ·
[h=1]TB CRF110 20mm Carb Kit
Part No: TBW9142[/h]



Complete Carb Kit that includes the reverse intake, 20mm Carb, airfilter, main jet kit, and a throttle cable

 

· Vendor
Joined
·
10,894 Posts
Discussion Starter · #40 ·
[h=1]Polisport - Plastic Kit - Honda CRF110 '13
Part No: W-64-905[/h]



IN STOCK
ALL BLACK OR ALL WHILE
NO OEM COLOR
Polisport is proud to present Durable Gloss Polypropylene (DGP), the first plastic composition for off-road that incorporates maximum gloss and high resistance to breaking
  • Injection molded quality for a perfet OEM type fit
  • Exact replica of stock OEM plastic
  • Inexpensive alternative to OEM replacement parts
  • Pre-drilled for perfect mounting every time
  • Kits include front and rear fenders, side panels, radiator shrouds, and # plate in factory OEM colors
 
21 - 40 of 49 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top