[taz69]

Hey guys I have a few parts I had in my shop and im doing some cleaning out. I have a Takegawa 106 or 88 kit.. I have Takegawa 50mm crank (125.00) and I also have a Takegawa 52mm piston and Takegawa cylinder and gasket kit. Piston and cylinder are NEW and have never been run.. The crank has 6 hrs on it.. The piston is made for a +R head. It can be used on a stock crank and its an 88cc. Or it can be used on the 50mm crank and it becomes a 106cc. I will take (125.00) for the cylinder piston and gasket set or 225.00 for both (Crank and Cylinder with piston and gaskets).. Thats cheaper than the TB kit.. It starts at $265.00. So if you are interrested in one or both let me know.. Thanks...

 

[taz69]

Hey guys I have a few parts I had in my shop and im doing some cleaning out. I have a Takegawa 106 or 88 kit.. I have Takegawa 50mm crank (125.00) and I also have a Takegawa 52mm piston and Takegawa cylinder and gasket kit. Piston and cylinder are NEW and have never been run.. The crank has 6 hrs on it.. The piston is made for a +R head. It can be used on a stock crank and its an 88cc. Or it can be used on the 50mm crank and it becomes a 106cc. I will take (125.00) for the cylinder piston and gasket set or 225.00 for both (Crank and Cylinder with piston and gaskets).. Thats cheaper than the TB kit.. It starts at $265.00. So if you are interrested in one or both let me know.. Thanks...

 

[w3racing]

Can I use the cylinder to freshen up my takegawa type r? If it is compatible, how much do you want for it?

 

[taz69]

Can I use the cylinder to freshen up my takegawa type r? If it is compatible, how much do you want for it?

Yea the cylinder is a 52mm bore so it would be perfect for any 88.. Im not sure if I wana seperate the cylinder and piston as of just yet. I will check and seee how much a cylinder goes for as I said it and the piston have never been used...

 

[twosmoke30]

what piston is it?

for a stock head or....+r..etc

 

[traut811]

what piston is it?

for a stock head or....+r..etc

The piston is made for a +R head

 

[#78]

Hey Trev, what is the part number on the piston

 

[LasVegasStreetterror]

Could you send me some pics of the 50mm Takegawa crank ? [email protected]

A nice clear one of the small end of rod would be great. Paypal ready

 

[ollacolla13]

how much for the 88cc kit? any pics? pm me

 

[was_110]

is it a high top piston?



Will it work with a R stage head?

 

[taz69]

Delete

 

[w3racing]

I will take the cylinder, piston, and gaskets if the piston will work with the older type-r. If not I still want the cylinder if you will separate them.

 

[w3racing]

The piston listed will not work with the older takegawa type-r. The part number for that piston is 010-1-02-7080 according to two brothers.

 

[taz69]

w3racing you are correct. It will only work for a +R head.. If it dosent sell as an 88 kit by this weekend I might split the cylinder and piston up. If I do you will be the first guy I let know.. TwoBrothers wants 185.00 for a cylinder lol thats crazy!!!!

 

[LasVegasStreetterror]

In that case, I'll buy the Takegawa 50mm crank. Payment will be with you as soon as I get home tonight.

 

[taz69]

In that case, I'll buy the Takegawa 50mm crank. Payment will be with you as soon as I get home tonight.

My paypal acct. is [email protected]... $125.00 and its yours send me an address or post one in here and I will send it.. I will hold the cash till you get it and are 100% cool with it..

 

[LasVegasStreetterror]

Payment sent for the Takegawa crank.

 

[taz69]

Payment sent for the Takegawa crank.

Chris send me an address and I will mail it out today. Crank is sold.. So I have a 88 kit still.. 125.00 for the cylinder and the piston. Both have never been used...

4628 Burgoa Court

Las Vegas, NV 89141

United States



Chris im going to send it to this address is that ok???

 

[taz69]

TAKEGAWA 88 Cylinder and Piston

Hey everyone. Well I have a 88 piston for a +R head. Gasket set and a Takegawa cylinder (52mm) for 125.00 All new and never used. Just let me know if anyone would like it Thanks.. Trevor

 

[LongMooie]

Can I use the cylinder to freshen up my takegawa type r? If it is compatible, how much do you want for it?

if this guy wants to commit to the cylinder ill take the piston for a spare